|
Readability
|
0.1 mg / 0.001%
|
|
Weighing Capacity
|
100 g
|
|
Typical Reproducibility of the Weighing System
|
Starting at an initial sample weight of approx. 1 g: ± 0.1% Starting at an initial sample weight of approx. 5 g: ± 0.02%
|
|
Method of Measurement
|
Thermogravimetric; loss on drying
|
|
Recommended Moisture Range
|
0.001 - 99.999%
|
|
Heat Source
|
Four parallel infrared quartz cylinders
|
|
Modular Extension
|
Optional; up to 4 heater modules connectable
|
|
Data Printer
|
Integrated thermal printer; 40 characters
|
|
Temperature Range and Adjustment
|
30-210°C in one-degree increments
|
|
Temperature Steps
|
Programmable; one or two with selectable ramp rate
|
|
Standby Temperature
|
Standby temperature selectable from 30-160°C
|
|
Temperature Display
|
Display of target temperature and actual temperature during the measurement and in standby mode
|
|
Display Modes
|
Weight loss in mg, % moisture, % dry weight, % volatiles, ppm moisture, ppm dry weight, concentration mg/L
|
|
Modes of Operation
|
Standard, syringe, concentration or 2-phase drying mode
|
|
Endpoint Determination
|
Timer mode; when value falls below a defined weight loss per time unit (%/min); trend shutoff
|
|
Program
|
300 programs; battery-backed memory
|
|
Data Storage
|
Results with statistics of the last 999 measurements: average, SD, RSD, min and max
|
|
Temperature Adjustment
|
Optional set for internal electronic two-point adjustment
|
|
Adjustment of the Weighing System
|
Internal calibration weight or manual calibration and adjustment using an external weight
|
|
Ideal Initial Weight
|
Audio and visual display for programmable weighing of a sample to an initial target
|
|
Pass-Fail Function
|
Programmable target value including limits; pass-fail information at the end of a measurement
|
|
Display
|
Backlit VGA display
|
|
Real-Time Curves
|
Real-time curves of the loss in weight (% or grams) as well of the temperature curve during and after the measurement
|
|
System Status Indicator Lights
|
Two tricolor LEDs (balance & heater) on front of heater module
|
|
Interfaces
|
Serial and Ethernet; USB for service
|
|
Weighing System
|
Monolithic weighing system for high-precision results
|
|
Dimensions (W x D x H)
|
16.3 x 19.5 x 9.3 in. (41.3 x 49.5 x 23.5 cm), modules combined
|
|
Weight
|
22 lb.(10 kg), modules combined
|
|
Electrical Requirements
|
90-250 VAC, 50/60Hz, self-adjusting power supply
|
