VWR Scientific DVX-2500 Digital Multi Tube Vortexer
Speed Range
500 to 2500 RPM
Maximum RCF
± 25 RPM
Orbit
3.6 mm (0.14 in.)
- Digital timer allows precise control from 1 second to 9999 minutes
- Pulse mode with adjustable on/off cycles for intermittent vortexing
- Heavy-duty construction with corrosion-resistant enamel finish for stability and durability
- Intuitive control panel with run/stop, pulse, and directional buttons
- Compact footprint with dimensions of 9.5 x 15.1 x 16 in (24.1 x 38.4 x 40.6 cm)
The VWR Scientific DVX-2500 Digital Multi Tube Vortexer is designed for gentle shaking or vigorous vortexing of several samples at one time in a wide variety of applications. Constructed using a heavy base casting with corrosion-resistant enamel finish, units remain stable on work surfaces.
All of our equipment is fully tested to perform at factory specifications before being shipped.
The VWR Scientific DVX-2500 Digital Multi Tube Vortexer includes:
- > Power Cord
- > Operator's Guide
- > Full 180 Day Parts and Labor Warranty
VWR Scientific DVX-2500 Digital Multi Tube Vortexer Specifications
|
Speed Range |
500 to 2500 RPM |
|
Accuracy |
± 25 RPM |
|
Orbit |
3.6mm |
|
Weight Capacity |
10 lbs (4.5 kg) |
|
Timer |
Digital 1 sec to 9999 minutes |
|
Controls |
On/off rocker switch, speed display, up/down arrows, time display, run/stop buttons, pulse on/off buttons |
|
Dimensions |
9.5 x 15.1 x 16 in (24.1 x 38.4 x 40.6 cm) |
|
Electrical Requirements |
115V, 50/60Hz, 100W |
- Verify power supply and PCB output correct, stable voltages across all required circuits
- Confirm the correct platform head is installed according to specifications
- Inspect the display for dim or dead pixels, replacing any compromised sections to maintain clear visibility
- Confirm full functionality of all buttons and knobs, ensuring accurate input response
- Verify that touch, pulse, and continuous modes operate fully and as intended
- Inspect all internal wiring for breakages, tears, or wear, replacing any underperforming components to ensure reliability
- Disassemble and thoroughly clean the internal casing to remove any accumulated debris
- Check that the feet are intact and confirm the vortexer is properly balanced on a flat surface
- Conduct a comprehensive cosmetic inspection to ensure all exterior surfaces meet quality standards
Technician Inspection and Recertification Checklist: Vortexer
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment| Task | Completed? | Remarks? |
| Verify power supply and PCB output stable, correct voltages across circuits | Completed | |
| Confirm correct platform head is installed according to specifications | Completed | |
| Inspect display for dim or dead pixels; replace compromised sections for clarity | Completed | |
| Confirm functionality of all buttons and knobs for accurate input response | Completed | |
| Verify full operation of touch, pulse, and continuous modes as intended | Completed | |
| Inspect internal wiring for damage; replace underperforming components for reliability | Completed | |
| Disassemble and clean internal casing to remove accumulated debris | Completed | |
| Check feet for integrity and confirm vortexer is balanced on flat surface | Completed | |
| Conduct comprehensive cosmetic inspection to ensure quality of exterior surfaces | Completed |
102 Tide Mill Road, Hampton NH 03842
customerservice@marshallscientific.com | (603) 601-8511 |
www.marshallscientific.com
Copyright © 2024 by Marshall Scientific LLC. All rights reserved.
VWR DVX-2500 Multi-Tube Vortexer Manual
Click Here to View all the Technical Specs for the DVX-2500
Click Here to View the Technical Specs for the DVX-2500
