VWR 76019-132 Centrifuge w/ 15ml Rotor

Features

• Digital control system provides straightforward adjustment and monitoring of centrifugation parameters
• Digital display allows users to view RPM or RCF along with run time
• RPM/RCF conversion button enables convenient switching between speed measurements
• Pulse operation supports quick-spin applications
• Brushless DC motor drive provides reliable operation with reduced maintenance requirements
• Adjustable timer supports timed runs from 30 seconds to 99 minutes or continuous operation
• Secure lid lock helps prevent access during centrifugation
• Over-speed detection provides additional operational protection
• Automatic internal diagnostics help monitor proper centrifuge operation
• Compact benchtop design conserves valuable laboratory workspace

The VWR 76019-132 Centrifuge with 15 mL Rotor is a compact, general-purpose centrifuge designed for routine research and clinical laboratory applications. Equipped with an 8 x 15 mL fixed-angle rotor, the centrifuge provides variable speeds from 300 to 4,500 RPM and is powered by a brushless DC motor for reliable operation. A digital display allows users to monitor either RPM or RCF along with run time, while a dedicated RPM/RCF conversion button simplifies switching between operating parameters.

Designed for convenient and safe everyday centrifugation, the 76019-132 features pulse operation for quick spins, a secure door interlock, over-speed detection, and automatic internal diagnostics. Its compact footprint makes it well suited for laboratories requiring dependable general-purpose centrifugation without occupying excessive bench space.

All of our equipment is fully tested to perform at factory specifications before being shipped.

VWR 76019-132 Centrifuge w/ 15ml Rotor Specifications

Centrifuge Inspection and Recertification Checklist

• Confirm the power supply output voltages match specified requirements for stable distribution to all internal components
• Measure and verify voltages at PCB test points to ensure accurate power delivery and circuit integrity
• Confirm rotor compatibility with the centrifuge model and check that rotor detection systems recognize the rotor type
• Inspect the exterior for any cosmetic or structural damage that could affect performance or safety
• Check the door mechanism alignment to ensure secure and smooth opening and closing
• Inspect and replace the gas strut with an OEM part to maintain proper door support and safety
• Examine the rotor chamber bowl for dents or damage and replace as needed to ensure safe operation
• Replace and confirm full functionality of all lid lock switches to maintain secure closure
• Inspect and lubricate the door lock mechanism, applying grease to the lid lock rail for smooth operation
• Test compressor functionality (if applicable) to ensure proper operation and consistent temperature control
• Conduct an 8-12 hour cycle test to validate consistent performance over prolonged use
• Confirm rotor motor stability, check for unusual noise, and assess mechanical integrity during operation
• Inspect the condensation drain and clear any clogs to prevent moisture buildup in the rotor chamber
• Verify RPM accuracy using an NIST-traceable tachometer and perform calibration as necessary
• Check the centrifuge error log to ensure zero recorded issues, confirming system reliability

Technician Inspection and Recertification Checklist: Centrifuges

The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment

Task	Completed?	Remarks?
Confirm power supply output voltages match specified requirements	Completed
Measure and verify voltages at PCB test points for accuracy	Completed
Confirm rotor compatibility and detection for proper identification	Completed
Inspect exterior for cosmetic or structural damage	Completed
Check door mechanism alignment for secure opening and closing	Completed
Inspect and replace gas strut with OEM part as needed	Completed
Examine rotor chamber for dents or damage and replace if necessary	Completed
Replace and confirm functionality of all lid lock switches	Completed
Lubricate door lock mechanism and lid lock rail for smooth operation	Completed
Test compressor (if applicable) for proper operation and cooling	Completed
Run 8-12 hour cycle test to ensure consistent performance	Completed
Check rotor motor for stability, noise, and integrity	Completed
Inspect and clear condensation drain to prevent buildup	Completed
Verify RPM accuracy with NIST traceable tachometer and calibrate	Completed
Check centrifuge error log for zero recorded issues	Completed

102 Tide Mill Road, Hampton NH 03842
customerservice@marshallscientific.com | (603) 601-8511 |
www.marshallscientific.com
Copyright © 2024 by Marshall Scientific LLC. All rights reserved.

To View More of Our Recertification Protocol Click Here