Thermo Scientific RT Basic Magnetic Stirrer, Cat. #: 88880007
Stirrer Speed
150 to 2,500 RPM
Stirring Capacity
2L (0.5 gal.)
Plate Diameter
4.72 in. (11.9 cm)
Features
- Strong magnetic coupling ensures consistent and stable stirring performance
- Low-profile, lightweight design fits easily into compact laboratory spaces
- Durable polypropylene top and body provide excellent chemical resistance
- Brushless DC motor minimizes heat generation to protect sensitive samples
- Analog control knob allows simple and responsive speed adjustment
- Plug-and-play operation supports quick setup and ease of use
- Ideal for routine laboratory stirring applications across various workflows
Constructed with a durable polypropylene top and body, the stirrer offers excellent chemical resistance for long-term laboratory use. The brushless DC motor is designed to operate without generating excess heat, helping protect sensitive samples during operation. With plug-and-play functionality and simple controls, the Thermo Scientific RT Basic Magnetic Stirrer, Cat. #: 88880007 provides efficient, user-friendly performance for a wide range of general laboratory stirring tasks.
All of our equipment will be fully tested to perform at factory specifications before being shipped.
INCLUDED:
The Thermo Scientific RT Basic Magnetic Stirrer, Cat. #: 88880007 includes:
The Thermo Scientific RT Basic Magnetic Stirrer, Cat. #: 88880007 includes:
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Thermo Scientific RT Basic Magnetic Stirrer, Cat. #: 88880007 Specifications
| Stirrer Speed | 150 to 2,500 RPM |
| Stirring Capacity | 2L (0.5 gal.) |
| Plate Diameter | 4.72 in. (11.9 cm) |
| Plate Material | Polypropylene |
| Control | Analog |
| Weight | 1.3 lb. (0.6 kg) |
| Dimensions (W x D x H) | 5.1 x 5.1 x 2.6 in. (13 x 13 x 6.5 cm) |
| Electrical Requirements | 100 to 240V, 50/60Hz |
Hot Plate Stirrers Inspection and Recertification Checklist
- Inspect Display and Replace Any Dim/Dead Pixels (If Applicable).
- Inspect Ceramic Top for Any Cracks and Replace If Necessary.
- Inspect Functionality of All Buttons/Knobs.
- Use Magnetic Stir Bar Alongside NIST Tachometer to Confirm RPM of Internal Motor (If Applicable).
- Inspect Internal Wiring Inside Case.
- Clean Internal Parts and Vent Any Internal Debris.
- Check Feet to Confirm Plate Sits Properly Balanced.
- Replace All Parts That Were Removed on Internal Inspections.
- Confirm Temperature with NIST Traceable Temperature Probe (If Applicable).
- Ensure Cosmetics Are Acceptable.
Technician Inspection and Recertification Checklist: Hot Plate Stirrers
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment| Task | Completed? | Remarks? |
| Inspect Display and Replace Any Dim/Dead Pixels (If Applicable) | Completed | |
| Inspect Ceramic Top for Any Cracks and Replace If Necessary | Completed | |
| Use Magnetic Stir Bar Alongside NIST Tachometer to Confirm RPM of Internal Motor (If Applicable) | Completed | |
| Inspect Internal Wiring Inside Case | Completed | |
| Clean Internal Parts and Vent Any Internal Debris | Completed | |
| Check Feet to Confirm Plate Sits Properly Balanced | Completed | |
| Replace All Parts That Were Removed on Internal Inspections | Completed | |
| Confirm Temperature with NIST Traceable Temperature Probe (If Applicable) | Completed |
102 Tide Mill Road, Hampton NH 03842
customerservice@marshallscientific.com | (603) 601-8511 |
www.marshallscientific.com
Copyright © 2024 by Marshall Scientific LLC. All rights reserved.
Downloads
Click Here to View the Technical Specs for the Thermo Scientific RT Basic Magnetic Stirrer, Cat. #: 88880007
