Thermo Scientific Cimarec Plus SP88850100 Digital Hot Plate Stirrer
Maximum Temperature
400C
Stirrer Speed
50 to 1,500 RPM
Platform Size
10.25 x 10.25 in (26.7 x 26.7 cm)
Features
- Temperature adjustable in precise 1-degree increments for accurate control
- HOT TOP warning system alerts users when the surface exceeds 50C to prevent accidental burns
- Automatic over-temperature protection enhances safety during operation
- Durable ceramic top plate offers uniform heat distribution
- Easy-to-read LED display provides clear visibility of heating and stirring settings
- Raised display design safeguards electronics from spills and splashes
All of our equipment will be fully tested to perform at factory specifications before being shipped.
INCLUDED:
The Thermo Scientific Cimarec Plus SP88850100 Digital Hot Plate Stirrer includes:
The Thermo Scientific Cimarec Plus SP88850100 Digital Hot Plate Stirrer includes:
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Thermo Scientific Cimarec Plus SP88850100 Digital Hot Plate Stirrer Specifications
| Maximum Temperature | 400C |
| Stirrer Speed | 50 to 1,500 RPM |
| Max. Stirring Volume | 6L |
| Platform Size | 10.25 x 10.25 in (26.7 x 26.7 cm) |
| Plate Material | Ceramic |
| Weight | 13.0 lb. (5.9 kg) |
| Dimensions (W x D x H) | 11.3 x 17.2 x 4.1 in. (28.8 x 43.8 x 10.5 cm) |
| Electrical Requirements | 100-120V, 50/60Hz, 13.2A |
Hot Plate Stirrers Inspection and Recertification Checklist
- Inspect Display and Replace Any Dim/Dead Pixels (If Applicable).
- Inspect Ceramic Top for Any Cracks and Replace If Necessary.
- Inspect Functionality of All Buttons/Knobs.
- Use Magnetic Stir Bar Alongside NIST Tachometer to Confirm RPM of Internal Motor (If Applicable).
- Inspect Internal Wiring Inside Case.
- Clean Internal Parts and Vent Any Internal Debris.
- Check Feet to Confirm Plate Sits Properly Balanced.
- Replace All Parts That Were Removed on Internal Inspections.
- Confirm Temperature with NIST Traceable Temperature Probe (If Applicable).
- Ensure Cosmetics Are Acceptable.
Technician Inspection and Recertification Checklist: Hot Plate Stirrers
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment| Task | Completed? | Remarks? |
| Inspect Display and Replace Any Dim/Dead Pixels (If Applicable) | Completed | |
| Inspect Ceramic Top for Any Cracks and Replace If Necessary | Completed | |
| Use Magnetic Stir Bar Alongside NIST Tachometer to Confirm RPM of Internal Motor (If Applicable) | Completed | |
| Inspect Internal Wiring Inside Case | Completed | |
| Clean Internal Parts and Vent Any Internal Debris | Completed | |
| Check Feet to Confirm Plate Sits Properly Balanced | Completed | |
| Replace All Parts That Were Removed on Internal Inspections | Completed | |
| Confirm Temperature with NIST Traceable Temperature Probe (If Applicable) | Completed |
102 Tide Mill Road, Hampton NH 03842
customerservice@marshallscientific.com | (603) 601-8511 |
www.marshallscientific.com
Copyright © 2024 by Marshall Scientific LLC. All rights reserved.
Click Here to View the Technical Specs for the Thermo Scientific Cimarec Plus SP88850100 Digital Hot Plate Stirrer
