Corning PC 520 Hot Plate Stirrer
Corning PC 520 Stirrer/Hotplate features dial controls for stir and heat, an indicator light for power and a 10" X 10" platform. Power: 120V.
All of our equipment is in excellent condition and fully tested before shipping.
INCLUDED:
The Corning PC 520 Hot Plate Stirrer includes:
The Corning PC 520 Hot Plate Stirrer includes:
- Power Cord
- Operator's Manual
- Full 180 Day Parts and Labor Warranty
Corning PC 520 Hot Plate Stirrer Specifications:
|
Temperature Range |
25°C to 550°C |
|
Stirrer Speed |
60 to 1,100 RPM |
|
Platform Size |
10 x 10 in (25.4 x 25.4 cm) |
|
Electrical Requirements |
120V, 60Hz, 9.3A, 1113W |
Hot Plate Stirrers Inspection and Recertification Checklist
- Inspect Display and Replace Any Dim/Dead Pixels (If Applicable).
- Inspect Ceramic Top for Any Cracks and Replace If Necessary.
- Inspect Functionality of All Buttons/Knobs.
- Use Magnetic Stir Bar Alongside NIST Tachometer to Confirm RPM of Internal Motor (If Applicable).
- Inspect Internal Wiring Inside Case.
- Clean Internal Parts and Vent Any Internal Debris.
- Check Feet to Confirm Plate Sits Properly Balanced.
- Replace All Parts That Were Removed on Internal Inspections.
- Confirm Temperature with NIST Traceable Temperature Probe (If Applicable).
- Ensure Cosmetics Are Acceptable.
Technician Inspection and Recertification Checklist: Hot Plate Stirrers
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment| Task | Completed? | Remarks? |
| Inspect Display and Replace Any Dim/Dead Pixels (If Applicable) | Completed | |
| Inspect Ceramic Top for Any Cracks and Replace If Necessary | Completed | |
| Use Magnetic Stir Bar Alongside NIST Tachometer to Confirm RPM of Internal Motor (If Applicable) | Completed | |
| Inspect Internal Wiring Inside Case | Completed | |
| Clean Internal Parts and Vent Any Internal Debris | Completed | |
| Check Feet to Confirm Plate Sits Properly Balanced | Completed | |
| Replace All Parts That Were Removed on Internal Inspections | Completed | |
| Confirm Temperature with NIST Traceable Temperature Probe (If Applicable) | Completed |
102 Tide Mill Road, Hampton NH 03842
customerservice@marshallscientific.com | (603) 601-8511 |
www.marshallscientific.com
Copyright © 2024 by Marshall Scientific LLC. All rights reserved.
Click Here to View the Technical Specs for the PC-520
