 |
Corning PC 320 Hot Plate Stirrer
Temperature Range
25C to 500C
Speed Range
60 to 1,100 RPM
Platform Size
6 x 7.5 in (15.2 x 19.1 cm)
- Analog dial controls for precise temperature and stirring adjustments
- Wide temperature range of 25C to 500C for versatile applications
- Stirring speed range of 60 to 1100 RPM with eleven speed settings
- 6 x 7.5-inch white ceramic platform for superior heat retention and scratch resistance
- Bright platform surface enhances sample visibility for better monitoring
- Indicator light provides a clear signal when the hot plate is active
- Durable construction designed for consistent performance in laboratory environments
The Corning PC 320 Hot Plate Stirrer combines precise heating and stirring capabilities, making it an essential tool for laboratory applications. With easy-to-use analog dial controls for temperature and stir speed, it offers a wide temperature range of 25C to 500C and a stir speed range of 60 to 1100 RPM. The 6 x 7.5-inch white ceramic platform provides excellent heat retention, scratch resistance, and high contrast for clear visibility of samples. An indicator light ensures user safety by signaling when the hot plate is active. Powered by 120V, this hot plate stirrer is designed for reliable and consistent performance in any lab setting.
All of our equipment will be fully tested to perform at factory specifications before being shipped.
The Corning PC 320 Hot Plate Stirrer includes:
- > Power Cord
- > Full 180 Day Parts and Labor Warranty
Corning PC 320 Hot Plate Stirrer Specifications
|
Temperature Range
|
25°C to 500°C
|
|
Stirrer Speed
|
60 to 1,100 RPM
|
|
Platform Size
|
6 x 7.5 in (15.2 x 19.1 cm)
|
|
Electrical Requirements
|
120V, 60Hz
|
- Inspect the display for clarity and brightness, replacing any dim or dead pixels to ensure optimal performance.
- Examine external regulators for structural integrity and damage, replacing if necessary (if applicable).
- Assess the functionality of temperature, CO₂, and H₂O sensors, verifying accuracy and consistency (if applicable).
- Check all internal wiring for frays, tears, or breakages, addressing any compromised sections.
- Confirm software settings are properly configured to match the specifications of internal components.
- Inspect and clean the fan for efficient airflow, replacing if wear or malfunction is detected.
- Verify the condition of wheels and leveling mounts, ensuring stability and ease of movement.
- Inspect door gaskets and latches for sealing integrity, replacing if compromised to maintain proper enclosure.
- Calibrate temperature accuracy to 37°C using an NIST-traceable temperature probe for precision.
- Calibrate CO₂ levels to 5% using a Fyrite combustion test kit to verify environmental control (if applicable).
- Confirm temperature and CO₂ stability over a 24-hour period to ensure consistent conditions.
- Conduct a cosmetic inspection, verifying the unit meets appearance and cleanliness standards.
Technician Inspection and Recertification Checklist
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment
| Task |
Completed? |
Remarks? |
| Inspect display for clarity and replace if needed | Completed | |
| Examine external regulators for integrity and damage | Completed | |
| Assess temperature, CO₂, and H₂O sensors for accuracy | Completed | |
| Check internal wiring for frays, tears, or breakages | Completed | |
| Confirm software settings match internal component specs | Completed | |
| Inspect and clean fan, replacing if wear is detected | Completed | |
| Verify condition of wheels and leveling mounts | Completed | |
| Inspect door gaskets and latches for sealing integrity | Completed | |
| Calibrate temperature to 37°C with NIST-traceable probe | Completed | |
| Calibrate CO₂ to 5% with Fyrite combustion test kit | Completed | |
| Confirm 24-hour temperature and CO₂ stability | Completed | |
| Conduct cosmetic inspection to ensure appearance standards | Completed | |
To View More of Our Recertification Protocol Click Here
|
|
|
Great 
