100-120V, 50/60Hz, 5.4A
127V, 60Hz, 4A
200-240V, 50/60Hz, 2.7A
Displacement (50Hz)
20.5 m3h-1 /
Displacement (60Hz)
25.0 m3h-1 /
Speed (Pneurop 6602) 50 Hz
17.0 m3h-1 /
Speed (Pneurop 6602) 60Hz
20.4 m3h-1 /
Ultimate vacuum (total pressure)
without gas purge
3 x 10-2 mbar /
with gas purge
6.5 x 10-1 mbar /
with Fomblinƒš®
3 x 10-1 mbar /
Inlet connection
NW25
Outlet connection**
Nozzle 15 mm external ƒÆ’‹Å“ removable from 3/4 in BSP tapped hole
Max permitted pressure at outlet
0.5 bar gauge /
7 psig
Max inlet pressure
50 mbar /
for water vapour
38 Torr
Max water vapour pumping rate
0.65 kg h-1
Operating temp range
13-40ƒš°C
Nominal Rotation speed 50/60Hz
1440/1720 rpm
Power connector 1-ph*
IEC EN60320 C19
Motor power 50 Hz
0.55 kW
Motor power 60 Hz
0.75 kW
Weight
38 kg / 85 lbs
Noise @ 50Hz
57 dB(A)
Oil capacity - max
1.45 litre
Oil capacity - min
0.9 litre
Recommended oil
Ultragrade 19
Electrical Requirements
100-120V, 50/60Hz (For 230V option please contact)
Nominal rotational speed
1800 rpm
Displacement
6.2 m3h-1 / 3.6 ft3min-1
Peak pumping speed
0.020 mbar / 0.015 Torr
Minimum standby rotational speed
1200 rpm
Speed control resolution (percentage of full rotation speed)
1%
Pumping speed at minimum rotational speed
4.1
Maximum continuous inlet pressure
200 mbar
Motor power 1-ph
260 W
Power connector 1-ph
IEC EN60320 C13
Recommended fuse
10A, 250Vac rms
26.2 kg / 58 lb
Inlet flange
Exhaust flange
Noise level
52 dB(A)
Vibration at inlet flange
< 4.5 mms-1 (rms)
Leak tightness (static)
< 1x10-6 mbar ls-1
Operating temperature range
10 to 40 ‚°C / 41 to 104 ‚°F
Electrical Supply
115/230V
6.8 m3h-1 / 4.0 ft3min-1
6.2 m3h-1 / 3.6 ft 3min-1
28.0 m3h-1 / 16.5 ft3min-1
22.0 m3h-1 / 13.0 ft3min-1
0.030 mbar / 0.022 Torr
10
50 mbar
25.6 kg / 56 lb
Displacement 50 or 60Hz
43 m3h-1 / 25 ft3min-1
Peak pumping speed 50 or 60Hz
35 m3h-1 / 21 ft3min-1
Ultimate vacuum (Total pressure)
1 x 10-2 mbar / 8 x 10-3 Torr
Max inlet pressure for water vapour
35 mbar / 23 Torr
Max water vapour pumping rate ‚ GB I
70 gh-1
Max water vapour pumping rate ‚ GB II
240 gh-1
Max allowed outlet pressure
0.2 bar gauge / 2.9 psig*
Max allowed inlet and GB pressure
0.5 bar gauge / 7 psig
Motor power
0.52kW
Power connector
Nominal rotation speed
1750 rpm
48 kg / 105 lb
NW40
57 dB (A)
Vibration
<4.5mms -1 (rms)
<1 x 10-6 mbar ls-1
10 to 40 °C / 50 to 104 °F
115/230 V