Speed Range
Fixed at 18 RPM
Platform Capacity
Timer
Analog or Digital Control
Analog
Fixed at 35°
Electrical Requirements
12V, 2A, 24W
Approximately 2 to 20 RPM
Adjustable from 1° to 48°
120V, 50/60 Hz, 0.05A, 3W
40 to 1,100 RPM
Platform Size
10.5 x 7.5 in
Up to 5 min in 1 min increments or continuous
Orbit
0.12 in orbit
120 VAC, 60 Hz, 120 W, 1 A
3 to 60 RPM
11.6 x 11.6 in.
20 to 120 minutes in 10 minute steps, HOLD function
0.75 in. (1.9 cm)
115V, 50/60Hz, 0.3A
20 orbits/min
12 x 12 in
N/A
23‹Å¡
115 VAC; 50/60Hz, 6 watts, 0.5 amps
10.5 x 7.5 inch
Up to 5 minutes in 1 minute increments; continuous
0.12 inch
0 to 1100 RPM
4 microplates
4 mm
100-120 V, 50/60 Hz
100 to 1400 rpm
8 x 11 in
30 sec ƒš‚Å“ 99 minutes 50 seconds in 10 second steps, under 10 minutes in 1 second steps, timer HOLD function
Digital
3 mm
115V, 50/60hz, 0.45A
6 to 150 strokes/min
20 to 120 min (10 min increments) or continuous
Linear, 30 mm stroke length
9°
40 to 220 RPM
12 x 12 in (31 x 31 cm)
1 to 60 minutes; continuous
0.75 in (1.9 cm)
120V, 50/60Hz, 0.4A, 50W
100 to 1,200 RPM
2 microplates
0 to 99 minutes or continuous
120 V 60 Hz
5 to 30 RPM
12 x 10 inch
0-2hrs (60 Hz), 0-3hrs (50 Hz)
0 to ƒš± 24ƒš° angle
100-120V, 50/60Hz, 0.1A, 12W
1 to 50 RPM
32.4 x 25.4 cm (12.75 x 10 in)
1 sec to 9,999 min
1° to 5 °
120V, 50/60Hz
2 to 50 RPM
258 mm x 290 mm
1 to 120 minutes
5°
115V, 60Hz
50 ‚ 400 rpm
11 x 13 in
¾ in
120V
290 x 258 mm
5ƒš°
100 to 1200 RPM
4 microplates or 2 microtube racks
1 second to 160 hours
3mm (1/8 in)
150 to 1,000 RPM
1 min to 23 hr 59 min, continuous
0.1 in
120V, 130mA
40 to 300 RPM
22.2 x 29.8 cm (8.75 x 11.75 in)
15mm
120V, 50/60Hz, 50W
2.5 mm (0.098 in.)
25 to 500 RPM
33 x 28 cm (13 x 11 in)
1 min to 2 hours
19 mm (0.75 in)
115V, 50/60Hz
3 mm (0.12 in.)
