Home > Agilent HPLC Component Series > Agilent 1260 Infinity II HPLC Components
Sort By:
Page of 1
Agilent 1260 Infinity II HPLC G7167A Multisampler Agilent 1260 Infinity II HPLC G7167A Multisampler

Agilent 1260 Infinity II HPLC G7167A Multisampler Specifications

Injection Range Default: 0.1 to 100 µL in 0.1 µL increments;
optional: 20 µL or 40 µL (using 100 µL analytical
head)
Injection Precision <0.2 % RSD or SD <10 nL, whatever is greater
Injection Linearity 0.9999 in the range of 0.1 to 100 µL
Pressure Range Up to 800 bar
Sample Viscosity Range 0.2 to 5.0 cP
Sample Capacity 1H Drawer: up to 8 drawers and 16 positions; Shallow well plates (MTP) 2H Drawer: up to 4 drawers and 8 positions; MTP, deep well plates, vials, Eppendorf 3H Drawer: up to 2 drawers and 4 positions; MTP, deep well plates, vials up to 6 mL, Eppendorf
Injection Cycle Time <10 s using following standard conditions:
Default draw speed: 100 µL/min
Default eject speed: 400 µL/min
Injection volume: 1 µL
Carryover <0.003 % (30 ppm) Multisampler Standard and
Dual Needle
<0.0009 % (9 ppm) Multisampler Multiwash
Multiwash Outer needle wash and seat backflush for carryover reduction with up to 3 different solvents
Dimensions (H x W x D) 12.6 x 15.6 x 18.4 in. (32 x 39.6 x 46.8 cm)
Weight 48.5 lb. (22 kg.)
Electrical Requirements 100 to 240V, 50/60Hz, 180VA

Our Price: $18,995.00
Agilent 1260 Infinity II HPLC G1364F Analytical-Scale Fraction Collector Agilent 1260 Infinity II HPLC G1364F Analytical-Scale Fraction Collector

Agilent 1260 Infinity II HPLC G1364F Analytical-Scale Fraction Collector Specifications

Delay Volume (in ul)

Fraction collector inlet to diverter valve: ~50 (typical, depends on length of the tubing)

Diverter valve: ~15

Diverter valve to needle: ~10

Needle: ~4
Maximum System Flow 10 mL/min
Maximum Collection Volume

~20 mL with 30 x 48 mm (OD x L) tube

~30 mL with 30 x 75 mm (OD x L) tube
Maximum Capacity 3 fraction collectors in parallel plus one recovery fraction collector
Trigger Modes

Time slices

Peak (threshold, up- / downslope)

Timetable (combination of time intervals and peak)

Manual trigger (supported only with Agilent Instant Pilot G4208A)
Maximum Pressure 6 bar at the diverter valve during switching
Plates/Trays 4 x well-plates full tray (MTP), only one type of well-plates can be used at a time in one tray
Maximum Tube Height

48 mm with long needle assembly G1367-87200

75 mm with short needle assembly G1364-87202

Our Price: $8,695.00
Agilent 1260 Infinity II HPLC G7115A DAD Detector Agilent 1260 Infinity II HPLC G7115A DAD Detector

Agilent 1260 Infinity II HPLC G7115A DAD Detector Specifications

Detection Type 1024-element photodiode array
Light Source Deuterium and tungsten lamps
Wavelength Range 190 - 950 nm
Short Term Noise (ASTM) Single and Multi-Wavelength < ± 0.7 x 10-5 AU, at 254 and 750 nm
Drift < 0.9 x 10-3 AU/h at 254 nm
Linear Absorbance Range > 2 AU (5%) at 265 nm
Wavelength Accuracy ± 1 nm
Wavelength Bunching 1 - 400 nm, programmable in 1 nm steps
Slit Width 1, 2, 4, 8, 16 nm
Diode Width ~ 1 nm

Our Price: $14,495.00
Sale Price: $12,495.00
Money Saved: $2,000.00
Agilent 1260 Infinity II HPLC G7116A Multicolumn Thermostat Agilent 1260 Infinity II HPLC G7116A Multicolumn Thermostat

Agilent 1260 Infinity II HPLC G7116A Multicolumn Thermostat Specifications

Temperature Range Ambient -10°C to 85°C (minimum 4°C)
Temperature Stability ± 0.1°C
Temperature Accuracy ± 0.5°C (with calibration for 40°C)
Column Capacity 4 columns of up to 300 mm length
Heat-Up / Cool-Down Time 5 min from Ambient to 40°C
10 min from 40°C to 20°C
< 25 min from 25°C to 85°C

Our Price: $4,295.00
Agilent 1260 Infinity II HPLC G7162A RID Detector Agilent 1260 Infinity II HPLC G7162A RID Detector

Agilent 1260 Infinity II HPLC G7162A RID Detector Specifications

Detection Type Refractive Index
Refractive Index Range 1.00 to 1.75 RIU, calibrated
Measurement Range ± 600 x 10-6 RIU
Short Term Noise < ± 1.25 x 10-9 RIU
Drift < 200 x 10-9 RIU/hr
Valves Automatic purge and automatic solvent recycle

Our Price: $14,395.00
Sale Price: $12,995.00
Money Saved: $1,400.00
Agilent 1260 Infinity II HPLC G7122A Degasser Agilent 1260 Infinity II HPLC G7122A Degasser

Agilent 1260 Infinity II HPLC G7122A Degasser Specifications

Maximum Flow Rate 10 ml/min per channel
Number of Channels 4
Internal Volume Per Channel 12ml per channel
Materials in Contact with Solvent PTFE, PEEK
pH Range 1 to 14

Our Price: $3,395.00
Free Shipping
Agilent 1260 Infinity II HPLC G7114A VWD Detector Agilent 1260 Infinity II HPLC G7114A VWD Detector

Agilent 1260 Infinity II HPLC G7114A VWD Detector Specifications

Detection Type Double-beam photometer
Light Source Deuterium lamp
Wavelength Range 190 - 600 nm
Noise

< ± 0.25 x 10-5 AU, at 230 nm (single wavelength detection)

< ± 0.80 x 10-5 AU, at 230 nm and 254 nm (dual wavelength detection)
Drift < 1 x 10-4 AU/h at 230 nm
Linearity > 2.5 AU upper limit
Wavelength Accuracy ± 1 nm
Wavelength Precision < ± 0.1 nm
Slit Width 6.5 nm typical over whole wavelength range

Our Price: $8,095.00
Sale Price: $7,595.00
Money Saved: $500.00
Agilent 1260 Infinity II HPLC G7112B Binary Pump Agilent 1260 Infinity II HPLC G7112B Binary Pump

Agilent 1260 Infinity II HPLC G7112B Binary Pump Specifications

Hydraulic System Two dual piston in series pumps with servo-controlled variable stroke drive, power transmission by gears and ball screws, floating pistons
Settable Flow Range 0.001 - 5.0 ml/min, in 0.001 ml/min increments
Recommended Flow Range

0.05 - 5.0 ml/min
Flow Precision ≤ 0.07% RSD or ≤ 0.02 min SD, whichever is greater
Flow Accuracy ± 1% or 10 µl/min, whichever is greater, pumping degassed H2O at 10 MPa (100 bar)
Pressure Operating Range

Up to 60 MPa (600 bar, 8700 psi) up to 5 ml/min
Pressure Pulsation < 2% amplitude (typically < 1.3%) or < 0.3 MPa (3 bar, 44 psi), whichever is greater
Compressibility Compensation Pre-defined, based on mobile phase compressibility
Recommended pH Range 1.0 - 12.5, solvents with pH < 2.3 should not contain acids which attack stainless steel
Gradient Formation High-pressure binary mixing
Delay Volume 600 - 900 µl, dependent on back pressure; measured with water at 1 ml/min (water/caffeine tracer)
Settable Composition Range 0 - 100%
Recommended Compostion Range 1 - 99% or 5µl/min per channel, whichever is greater
Composition Precision < 0.15% RSD or < 0.04 min SD, whatever is greater
Integrated Degassing Unit

Number of channels: 2

Internal volume per channel: 0.45 ml

Our Price: $6,695.00
Sale Price: $6,295.00
Money Saved: $400.00
Agilent 1260 Infinity II HPLC G7111B Quat Pump Agilent 1260 Infinity II HPLC G7111B Quat Pump

Agilent 1260 Infinity II HPLC G7111B Quat Pump Specifications

Settable Flow Range Set points 0.001 to 10 ml/min, in 0.001 ml/min increments
Flow Range 0.2 to 10.0 ml/min
Flow Precision ≤ 0.07% RSD, or ≤ 0.02 min SD whatever is greater, based on retention time at constant room temperature
Flow Accuracy ± 1% or 10 µl/min, whatever is greater, pumping degassed H2O at 10 MPa (100 bar)
Pressure Operating Range

Operating range up to 60 MPa (600 bar, 8700 psi) up to 5 ml/min

Operating range up to 20 MPa (200 bar, 2950 psi) up to 10 ml/min
Pressure Pulsation < 2% amplitude (typically < 1.0%) or < 0.3 MPa (3 bar, 44 psi), whatever is greater, at 1 ml/min isopropanol, at all pressures > 1 MPa (10 bar, 145 psi)
Recommended pH Range 1.0 to 12.5, solvents with pH < 2.3 should not contain acids which attack stainless steel
Gradient Formation Low pressure quaternary mixing/gradient capability using proprietary high-speed proportioning valve
Delay Volume 600 to 900 µl, dependent on back pressure; measured with water at 1 ml/min
Composition Range 0 to 100% in 0.1% increments
Composition Precision < 0.2% RSD or < 0.04 min SD, whatever is greater, at 1 ml/min; based on retention time at constant room temperature
Integrated Degasser

Number of channels: 4

Internal volume per channel: 1.5 ml
Dimensions (H x W x D) 7.1 x 15.6 x 17.2 in. (18 x 39.6 x 43.6 cm)
Electrical Requirements 100 to 240 V, 50/60 Hz, 80 VA

Our Price: $9,295.00
Sale Price: $8,595.00
Money Saved: $700.00
Free Shipping