 |
 |
 |
|
VWR VX-2500 Multi Tube Vortexer
Speed Range
1,200 to 2,400 RPM
Weight Capacity
10 lb. (4.5 kg)
- Designed for both gentle shaking and vigorous vortexing of multiple samples simultaneously
- Suitable for a wide range of laboratory applications, offering versatility
- Heavy base casting with a corrosion-resistant enamel finish ensures stability and durability
- Speed range of 1200 to 2400 RPM, accommodating different shaking and vortexing needs
- Speed accuracy within 25 RPM, providing precise control
- Features an orbit of 3.6mm, optimizing mixing efficiency
- Has a substantial weight capacity of 10 lbs (4.5 kg)
- Equipped with a mechanical timer (0 to 60 seconds) and easy-to-use rocker switch controls for speed and time adjustment
The VWR VX-2500 Multi Tube Vortexer is designed for gentle shaking or vigorous vortexing of several samples at one time in a wide variety of applications. Constructed using a heavy base casting with corrosion-resistant enamel finish, units remain stable on work surfaces.
All of our equipment is fully tested to perform at factory specifications before being shipped.
The VWR VX-2500 Multi Tube Vortexer includes:
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
VWR VX-2500 Multi Tube Vortexer Specifications
|
Speed Range
|
1200 to 2400 RPM
|
|
Accuracy
|
25 RPM
|
|
Orbit
|
3.6mm
|
|
Weight Capacity
|
10 lbs (4.5 kg)
|
|
Timer
|
Mechanical 0 to 60 seconds
|
|
Controls
|
Rocker switch: run, standby, timer, speed knob, variable 1 to 10 dial
markings, time knob, variable 1 to 10 dial markings
|
|
Dimensions
|
9.5 x 15.1 x 16 in (24.1 x 38.4 x 40.6 cm)
|
|
Electrical Requirements
|
115V, 50/60Hz, 100W
|
VWR VX-2500 Multi-Tube Vortexer Manual Click Here to View all the Technical Specs for the VX-2500
- Verify power supply and PCB output correct, stable voltages across all required circuits
- Confirm the correct platform head is installed according to specifications
- Inspect the display for dim or dead pixels, replacing any compromised sections to maintain clear visibility
- Confirm full functionality of all buttons and knobs, ensuring accurate input response
- Verify that touch, pulse, and continuous modes operate fully and as intended
- Inspect all internal wiring for breakages, tears, or wear, replacing any underperforming components to ensure reliability
- Disassemble and thoroughly clean the internal casing to remove any accumulated debris
- Check that the feet are intact and confirm the vortexer is properly balanced on a flat surface
- Conduct a comprehensive cosmetic inspection to ensure all exterior surfaces meet quality standards
Technician Inspection and Recertification Checklist: Vortexer
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Verify power supply and PCB output stable, correct voltages across circuits
|
Completed
|
|
|
Confirm correct platform head is installed according to specifications
|
Completed
|
|
|
Inspect display for dim or dead pixels; replace compromised sections for clarity
|
Completed
|
|
|
Confirm functionality of all buttons and knobs for accurate input response
|
Completed
|
|
|
Verify full operation of touch, pulse, and continuous modes as intended
|
Completed
|
|
|
Inspect internal wiring for damage; replace underperforming components for reliability
|
Completed
|
|
|
Disassemble and clean internal casing to remove accumulated debris
|
Completed
|
|
|
Check feet for integrity and confirm vortexer is balanced on flat surface
|
Completed
|
|
|
Conduct comprehensive cosmetic inspection to ensure quality of exterior surfaces
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
