VWR Thermal Shake Touch Thermal Mixer, Cat. #: 89232-908

The VWR Thermal Shake Touch Thermal Mixer, Cat. #: 89232-908 is designed for applications that require consistent and precise results. With heating and shaking capabilities, the VWR Thermal Shake Touch Thermal Mixer uses interchangeable blocks to accommodate a wide variety of tubes and microplates. The easy-to-use 4.3” color LCD touch screen allows the user to save and visibly track progress through the live status bar for five user defined programs, each with five individual steps. The unit’s enhanced electronics and temperature sensor provide accurate, dependable temperature settings across the operating range. The low-profile design of the VWR Thermal Shake Touch Thermal Mixer, Cat. #: 89232-908 minimizes the unit’s footprint on the bench. This thermal mixer also features the use of a PID temperature controller, which maintains precise temperature control from 4°C above ambient to 100°C. Easy-to-use controls are featured allow the user to adjust temperature in 0.1°increments. This unit is also constructed from a high quality heat and chemical resistant polymer. The unit’s housing remains cool to the touch throughout normal operating temperatures. A hot top warning will also illuminate when the temperature reaches 40°C and will remain lit until the unit is cooled below 40°C for the user’s safety.

All of our equipment is fully tested to perform at factory specifications before being shipped.

VWR Thermal Shake Touch Thermal Mixer, Cat. #: 89232-908 Specifications

Speed Range	300 to 3,000 RPM (300 to 2,200 RPM with included block)
Speed Accuracy	± 2%
Temperature Range	Ambient +4°C to 100°C
Temperature Uniformity	± 1°C between 20°C and 45°C ± 2°C above 45°C
Heating Rate	5°C/minute
Timer	1 minute to 99 hours, 59 minutes
Orbit	3mm (0.12 in.)
Dimensions (L x W x H)	10.25 x 9.75 x 5.2 in. (26.04 x 24.77 x 13.2 cm)
Weight	17 lb. (7.7 kg)
Electrical Requirements	120V, 50/60Hz, 1.8A, 215W