 |
 |
 |
|
Popular Alternative Choice
Benchmark BT1502 Orbi-Shaker MP Microplate Orbital Shaker
- Designed for mixing of microplates with 3mm orbit.
- Secures up to 4 plates without springs or clamps.
- Speed range from 200 to 1,500 RPM; Capacity: 4 plates.
- Dimensions: 13.1 x 11.74 x 4.7 in; 250W power.
Go to Product Details
Brand New and No Lead Time!
VWR Micro Plate Shaker, Cat # 12620-926
VWR Micro Plate Shaker, Cat # 12620-926 in like new condition . Variable speed ranges and adjustable timer. All of our equipment will be fully tested to perform at factory specifications before being shipped.
The VWR Micro Plate Shaker, Cat # 12620-926 includes:
- > 7.75" x 11" Platform
- > NIST Calibration and Preventative Maintenance Report
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
VWR Micro Plate Shaker # 12620-926 Specifications
|
Speed Range
|
100 to 1200 RPM
|
|
Speed Accuracy
|
2%
|
|
Orbit Size
|
3mm
|
|
Timer
|
1 sec to 160 hours
|
|
Capacity
|
2 or 4 microplates
|
|
Platform Dimensions
|
19.7 x 27.9 cm (7.75 x 11 in)
|
|
Overall Dimensions (W x H x D)
|
27.9 x 10.2 x 43.2 cm (11 x 4 x 17)
|
|
Electrical Requirements
|
120V, 50/60Hz
|
VWR Microplate Shaker Manual
 Click Here to View all the Technical Specs for the Microplate Shaker
VWR Micro plate shaker, Cat # 12620-926 - Marshall Scientific
- Validate that the power supply and PCB deliver stable, correct voltage outputs across all necessary connections, ensuring reliable operation
- Thoroughly inspect the display for any dim, flickering, or dead pixels; replace affected elements to maintain full readability and operational clarity
- Test the full range of button functionality, confirming responsive, accurate input recognition across all settings
- Conduct a detailed inspection of bearings and bearing housing, identifying any worn or damaged bearings, and replace as needed to prevent operational disruption
- Examine the drive belt for signs of cracking, fraying, or material breakdown; replace as required to ensure sustained performance
- Measure and adjust motor drive belt tension to optimal specifications, securing reliable and efficient power transmission
- Verify accuracy of the onboard timer, confirming proper functionality and replacing if it deviates from expected performance
- Calibrate shaker rotation speed with a NIST-traceable tachometer, validating precision within specified operational limits
- Run the shaker continuously for an 8-12 hour testing period, closely observing the shaking platform for smooth, consistent motion, while monitoring for any error indicators such as knocking, skipping, or unusual vibrations
- Perform a comprehensive cosmetic inspection to confirm the device’s exterior meets aesthetic and quality standards, free from visible damage or wear
Technician Inspection and Recertification Checklist: Shakers
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Validate stable, correct voltage outputs from power supply and PCB
|
Completed
|
|
|
Inspect display for dim, flickering, or dead pixels; replace as needed
|
Completed
|
|
|
Test button functionality for responsiveness and accuracy across all settings
|
Completed
|
|
|
Inspect bearings and housing for wear; replace as needed to prevent disruption
|
Completed
|
|
|
Examine drive belt for cracking, fraying, or material breakdown; replace as required
|
Completed
|
|
|
Measure and adjust motor drive belt tension to optimal specifications
|
Completed
|
|
|
Verify onboard timer accuracy; replace if it deviates from expected performance
|
Completed
|
|
|
Calibrate shaker rotation speed using a NIST-traceable tachometer
|
Completed
|
|
|
Run 8-12 hour continuous test; observe platform for smooth, consistent motion
|
Completed
|
|
|
Perform comprehensive cosmetic inspection for quality standards compliance
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
