|
|
|
|
VWR Boekel Model 5420 Hybridization Oven, Cat. #: 230402V
The VWR Boekel Model 5420 Hybridization Oven, Cat. #: 230402V offers a robust solution for a variety of applications including Northern Blots, Southern Blots, and Microarrays. This hybridization oven ensures a rapid heat-up time and precise temperature control, ranging from Ambient +10°C to 100°C, with a temperature stability of ± 0.2°C and accuracy of ± 0.3°C at 65°C. It features a PID temperature controller and forced air convection to maintain optimal conditions. The programmable digital timer can be set up to 99 hours and 59 minutes, and the carousel can adjust speeds from 5 to 60 RPM in 1 RPM increments. Additional features include a reversible door, stackable design, and an easily removable stainless steel drip pan, enhancing its functionality and user convenience. All of our equipment is fully tested to perform at factory specifications before being shipped.
The VWR Boekel Model 5420 Hybridization Oven, Cat. #: 230402V includes:
- > Multi-Tube Carousel w/ 50ml Tube Clips
- > Operator's Guide
- > Power Cord
- > Full 180 Day Parts and Labor Warranty
VWR Boekel Model 5420 Hybridization Oven, Cat. #: 230402V Specifications
Temperature Range
|
Ambient +10°C to 100°C
|
Temperature Stability
|
± 0.2°C
|
Temperature Accuracy
|
± 0.3°C at 65°C
|
Speed Range
|
5 to 60 RPM
|
Maximum Capacity
|
30 x 50ml Tubes
|
Chamber Dimensions (W x D x H)
|
13.3 x 9.8 x 9.5 in. (33.7 x 24.8 x 24.1 cm)
|
Overall Dimensions (W x D x H)
|
15.8 x 17.5 x 18 in. (40 x 44.5 x 45.7 cm)
|
Weight
|
54 lb. (24.5 kg)
|
Electrical Requirements
|
115V, 60Hz, 350W, 2.8A
|
- Verify power supply and PCB outputs are within specified voltage ranges
- Inspect display for any dim or dead pixels, replacing as needed to ensure visibility
- Confirm full functionality and responsiveness of all control buttons
- Examine all internal wiring for frays, cuts, or damage, ensuring secure and reliable connections
- Inspect door seals and gaskets for integrity, replacing any compromised components
- Evaluate door handle and locking mechanism for wear or issues, replacing if performance is impaired
- Inspect and clean internal fan; replace if performance does not meet requirements
- Calibrate set temperature using a NIST-traceable probe for precise accuracy
- Confirm functionality of over-temperature alarm and indicator light
- Verify internal outlet functionality, if applicable, to ensure it meets operational standards
- Inspect internal lighting for full functionality and brightness, if applicable
- Perform a cosmetic inspection to confirm the oven’s exterior and interior meet quality standards
Technician Inspection and Recertification Checklist: Ovens
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
Task
|
Completed?
|
Remarks?
|
Verify power supply and PCB outputs are within specified voltage ranges
|
Completed
|
|
Inspect display for dim or dead pixels; replace if needed
|
Completed
|
|
Confirm full functionality of all control buttons
|
Completed
|
|
Examine internal wiring for damage; ensure secure connections
|
Completed
|
|
Inspect door seals and gaskets, replacing any compromised components
|
Completed
|
|
Evaluate door handle and locking mechanism, replacing if worn
|
Completed
|
|
Inspect and clean internal fan; replace if performance is insufficient
|
Completed
|
|
Calibrate set temperature using a NIST-traceable probe
|
Completed
|
|
Confirm over-temperature alarm and indicator light functionality
|
Completed
|
|
Verify internal outlet functionality, if applicable
|
Completed
|
|
Inspect internal lighting for full functionality and brightness
|
Completed
|
|
Perform cosmetic inspection to confirm quality standards of exterior and interior
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
|
|
|
|