|
|
|
|
VWR Boekel Hybridization Oven, Cat. #: 230401V
The VWR Boekel Hybridization Oven, Cat. #: 230401V is a high capacity hybridization oven that can be utilized for a multitude of Southern, Northern, and Western blotting needs. This oven is capable of holding up to ten standard 35mm diameter by 300mm long bottles or twenty 150mm long bottles. The VWR Boekel Hybridization Oven can also be adapted for use with 1.5/2.0ml, 15ml, 50ml tubes, as well as microplates and currently includes the microplate carousel. The VWR Boekel Hybridization Oven, Cat. #: 230401V utilizes an adjustable speed carousel and slight offset to provide the three-dimensional motion needed for excellent membrane coverage. Forced air circulation couple with microprocessor controlled temperature control provides unsurpassed temperature performance and the most consistent conditions from procedure to procedure. All of our equipment is fully tested to perform at factory specifications before being shipped.
The VWR Boekel Hybridization Oven, Cat. #: 230401V includes:
- > Microplate Carousel
- > Operator's Guide
- > Power Cord
- > Full 180 Day Parts and Labor Warranty
VWR Boekel Hybridization Oven, Cat. #: 230401V Specifications
Temperature Range
|
Ambient +10°C to 100°C
|
Temperature Stability
|
± 0.5°C
|
Temperature Accuracy
|
± 0.5°C at 65C
|
Speed Range
|
5 to 60 RPM
|
Max Capacity
|
10 x (35 x 300mm bottles)
20 x (35 x 150mm bottles)
|
Chamber Dimensions (W x D x H)
|
13.5 x 9.25 x 10 in. (34.3 x 23.5 x 25.4 cm)
|
Overall Dimensions (W x D x H)
|
15.5 x 17.25 x 18 in. (39.4 x 43.8 x 45.7 cm)
|
Electrical Requirements
|
115V, 60Hz, 2.6A, 300W
|
- Verify power supply and PCB outputs are within specified voltage ranges
- Inspect display for any dim or dead pixels, replacing as needed to ensure visibility
- Confirm full functionality and responsiveness of all control buttons
- Examine all internal wiring for frays, cuts, or damage, ensuring secure and reliable connections
- Inspect door seals and gaskets for integrity, replacing any compromised components
- Evaluate door handle and locking mechanism for wear or issues, replacing if performance is impaired
- Inspect and clean internal fan; replace if performance does not meet requirements
- Calibrate set temperature using a NIST-traceable probe for precise accuracy
- Confirm functionality of over-temperature alarm and indicator light
- Verify internal outlet functionality, if applicable, to ensure it meets operational standards
- Inspect internal lighting for full functionality and brightness, if applicable
- Perform a cosmetic inspection to confirm the oven’s exterior and interior meet quality standards
Technician Inspection and Recertification Checklist: Ovens
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
Task
|
Completed?
|
Remarks?
|
Verify power supply and PCB outputs are within specified voltage ranges
|
Completed
|
|
Inspect display for dim or dead pixels; replace if needed
|
Completed
|
|
Confirm full functionality of all control buttons
|
Completed
|
|
Examine internal wiring for damage; ensure secure connections
|
Completed
|
|
Inspect door seals and gaskets, replacing any compromised components
|
Completed
|
|
Evaluate door handle and locking mechanism, replacing if worn
|
Completed
|
|
Inspect and clean internal fan; replace if performance is insufficient
|
Completed
|
|
Calibrate set temperature using a NIST-traceable probe
|
Completed
|
|
Confirm over-temperature alarm and indicator light functionality
|
Completed
|
|
Verify internal outlet functionality, if applicable
|
Completed
|
|
Inspect internal lighting for full functionality and brightness
|
Completed
|
|
Perform cosmetic inspection to confirm quality standards of exterior and interior
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
|
|
|
|