 |
 |
 |
|
VWR 14005-824 Digital Mini Vortexer
The VWR 14005-824 Digital Mini Vortexer offers reliable and precise mixing for demanding laboratory applications. Featuring a microprocessor for consistent speed control, it ensures repeatable results across a speed range of 500 to 3,000 RPM. The digital timer allows users to program mixing durations from 1 second to 160 hours, automatically shutting off when the set time reaches zero for added convenience.
With its compact dimensions of 7.75 x 6 x 5.5 inches (19.69 x 15.24 x 13.97 cm) and a weight of 11.7 lb. (5.3 kg), this mixer is both portable and robust. The unit operates in continuous mode for accessory attachments or touch mode for quick, responsive mixing. Equipped with an LED display for speed and time, this versatile vortexer is designed to meet the needs of labs requiring strong, consistent mixing action. Powered by a 120V, 50/60 Hz system with 150W, it delivers reliable performance for a variety of applications.
All of our equipment is in excellent condition and will be fully tested to perform at factory specifications before being shipped.
The VWR 14005-824 Digital Mini Vortexer includes:
- > Rubber Dimpled Head
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
VWR 14005-824 Digital Mini Vortexer Specifications
| Speed Range |
500 to 3,000 RPM |
| Orbit |
4.9mm (0.194 in.) |
| Timer |
1 second to 160 hours |
| Operating Modes |
Auto, Standby, On |
| Dimensions (L x W x H) |
7.75 x 6 x 5.5 in. (19.7 x 15.24 x 13.97 cm) |
| Weight |
11.7 lb. (5.3 kg) |
| Electrical Requirements |
115V, 50/60Hz, 150W |
- Verify power supply and PCB output correct, stable voltages across all required circuits
- Confirm the correct platform head is installed according to specifications
- Inspect the display for dim or dead pixels, replacing any compromised sections to maintain clear visibility
- Confirm full functionality of all buttons and knobs, ensuring accurate input response
- Verify that touch, pulse, and continuous modes operate fully and as intended
- Inspect all internal wiring for breakages, tears, or wear, replacing any underperforming components to ensure reliability
- Disassemble and thoroughly clean the internal casing to remove any accumulated debris
- Check that the feet are intact and confirm the vortexer is properly balanced on a flat surface
- Conduct a comprehensive cosmetic inspection to ensure all exterior surfaces meet quality standards
Technician Inspection and Recertification Checklist: Vortexer
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Verify power supply and PCB output stable, correct voltages across circuits
|
Completed
|
|
|
Confirm correct platform head is installed according to specifications
|
Completed
|
|
|
Inspect display for dim or dead pixels; replace compromised sections for clarity
|
Completed
|
|
|
Confirm functionality of all buttons and knobs for accurate input response
|
Completed
|
|
|
Verify full operation of touch, pulse, and continuous modes as intended
|
Completed
|
|
|
Inspect internal wiring for damage; replace underperforming components for reliability
|
Completed
|
|
|
Disassemble and clean internal casing to remove accumulated debris
|
Completed
|
|
|
Check feet for integrity and confirm vortexer is balanced on flat surface
|
Completed
|
|
|
Conduct comprehensive cosmetic inspection to ensure quality of exterior surfaces
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
