Home > Autoclaves >

Tuttnauer 3870EAP Digital Autoclave

Net 30 Terms and Financing Available

Our Price: $12,195.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 6 to 8 Business Days

Request a Formal Quote

Quantity in Stock:1

Product Code: TU-3870EAP

Qty:

Description

Recertification Protocol

Technical Specification Sheet

Tuttnauer 3870EAP Autoclave

Chamber Volume
85L

Sterilization Temperature Range
105°C to 137°C

Chamber Dimensions
15 x 27 in. (38.1 x 68.6 cm)

Features

Designed to autoclave wrapped, unwrapped, glass and tools.
Not suitable for liquids
Sterilization time up to 99 minutes
Temperature selection from 105°C to 137°C
Includes trays
In-line particle filter to protect valves
Electronic pressure and temperature sensors
Low Water Alarm - sounds when reservoir needs to be refilled
Standby Heating - keeps chamber warm for quicker cycles
Built-In Printer - Provides a printed summary at the end of each cycle, documenting temperature, elapsed sterilization and drying time, selected cycle number, real time and date, as well as any errors or interruptions that may occur during the cycle
Chamber Volume – 85L
Power – 230V, 1 Phase (60Hz) NEMA 6-15

The Tuttnauer 3870EA Autoclave is a large automatic table top autoclave that is perfect for many environments include multi-doctor practices, clinics, or surgery centers. The 15"x 30" chamber accommodates longer instruments or a large number of small instruments. Features closed door active drying system to maintain sterility and ensure efficient drying, long life electro polished chamber and door, brighter, easier to read panel, program parameters that can be customized and stored, and the optional internal printer that prints documents such as date, time, temperature, and pressure. The 3870EA is also equipped with an air compressor that, during the drying stage, draws air through a HEPA filter (0.2m). It pushes that air through the heated chamber to remove moisture and facilitate the drying operation.

All of our equipment is fully tested to perform at factory specifications before being shipped.

INCLUDED:
The Tuttnauer 3870EAP Digital Autoclave includes:

> 2 Trays
> Printer
> Operator's Guide
> Power Cord
> Full 180 Day Parts and Labor Warranty

Tuttnauer 3870EAP Autoclave Specifications

Chamber Volume	85 L
Chamber Size (Diameter x Depth)	15 x 27 in
Temperature Range	105C to 137C
Standard Cassettes Capacity	15 full
Number of Trays	2
Tray Dimensions (H x W x D)	675 x 25 x 286 mm
Overall Dimensions (H x W x D)	660 x 525 x 875 mm
Electrical Requirements	230V, 50/60Hz, 13A, 3000W

Tuttnauer 3870EA Manual

Click Here to View all the Technical Specs for the 3870EA

Request a Formal Quote

Autoclave Inspection and Recertification Checklist

Verify power supply output to ensure precise voltage delivery as per equipment specifications
Check full display functionality, replacing any dead or dim pixels for optimal clarity
Confirm unit is level to maintain stability and accurate operational performance
Inspect door seal integrity, replacing if any wear or damage compromises airtight performance
Examine and clean both external and internal filters to ensure unobstructed airflow and system efficiency
Execute comprehensive cycle testing to validate consistent operation
Verify printer functionality (if applicable) to ensure precise print outputs without error
Assess internal plumbing system for any leaks or pressure inconsistencies
Inspect all electrical connections and wiring for secure attachment and optimal conductivity
Verify functionality of internal switches to ensure reliable engagement and operational control
Inspect and clean the water reservoir to maintain purity and prevent contamination
Confirm accuracy of pressure readings, recalibrating if deviations are identified
Perform final test cycles, ensuring zero errors for validated operational readiness

Technician Inspection and Recertification Checklist: Autoclaves

The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment

Task	Completed?	Remarks?
Verify power supply output voltages	Completed
Check display functionality and replace dead/dim pixels	Completed
Confirm unit leveling for stability	Completed
Inspect and replace damaged door seal	Completed
Clean external and internal filters for airflow efficiency	Completed
Conduct comprehensive cycle testing	Completed
Confirm printer functionality (if applicable)	Completed
Assess plumbing for leaks or pressure issues	Completed
Inspect electrical connections for secure and optimal conductivity	Completed
Verify internal switch functionality	Completed
Inspect and clean water reservoir	Completed
Confirm pressure reading accuracy and recalibrate if needed	Completed
Perform final test cycles with zero errors	Completed