 |
 |
 |
|
Thermo Sorvall Legend T Plus Benchtop Centrifuge
Maximum Capacity
4 x 750 ml
- SMARTspin™ imbalance detection system, effective based on rotor and speed.
- Automatic rotor recognition ensures safe and optimal operation with different rotors.
- Microprocessor-based control provides precise control over centrifugation parameters.
- EASYset soft-touch keypad facilitates one-touch control of speed, programming, and pre-cooling functions.
- Quick run key activates maximum acceleration to the maximum permissible speed of the rotor; centrifuge stops with maximum deceleration upon key release.
- 9 acceleration and 9 deceleration profiles offer customization for various sample types and requirements.
The Thermo Sorvall Legend T+ Benchtop Centrifuge is a versatile,
high-capacity centrifuge featuring electronic imbalance detection with optimum
run stability, automatic rotor recognition, and microprocessor-based control.
This Sorvall centrifuge can accommodate nine different swinging-bucket rotor
configurations and seven different fixed-angle rotors, making it extremely
flexible for high throughput. The Legend T+'s low deck allows for easy loading and
unloading of samples while the EASYset soft-touch keypad allows for one-touch
control of speed, programming and pre-cooling functions.
This rotor reaches a maximum speed of 4,150 RPM.
The Legend T+ is best used for large capacity assays,
including tissue culture, vaccination development, DNA preparation, and protein
research, among others.
All of our equipment is fully tested to perform at factory
specifications before being shipped.
Please confirm this rotor meets your application needs and request a different rotor, if necessary. Available rotors can be found in our Rotor Compatibility Guide.
The Thermo Sorvall Legend T Plus Benchtop Centrifuge includes:
- > 75006445 Rotor and 4 buckets
- > 1 Set of 15ml Adapters
- > 1 Set of 50ml Adapters
- > NIST Centrifuge Calibration and Preventative Maintenance Report
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Thermo Sorvall Legend T Plus Benchtop Centrifuge Specifications
|
Max g-force
|
24,400xG
|
|
Timer
|
9 hrs, 59 min, cont. mode
|
|
Max speed
|
15,000 rpm with fixed angle rotor
4,150 with swing bucket rotor
|
|
Max capacity
|
4 x 750 ml
|
|
Dimensions (W x H x D)
|
21.75 x 14.25 x 26.25 in
|
|
Electrical
|
120 VAC, 60 Hz
|
|
Refrigeration
|
No Refrigeration
|
- Door Latch Assembly Checked for Full Function
- Door Hinges are Checked and Lubed as Needed
- Drive Belt is Checked for Rips and Tears and Replaced if Needed
- Rotors and O-rings are Lubed as Needed
- Lamps and Display are Checked and Replaced if Dim
- Line Cord is Checked for Signs of Fray or Damage and Replaced Accordingly
- Internal Circuitry is Checked for Faulty/Shorted Components and Replaced Accordingly
- Confirm the power supply output voltages match specified requirements for stable distribution to all internal components
- Measure and verify voltages at PCB test points to ensure accurate power delivery and circuit integrity
- Confirm rotor compatibility with the centrifuge model and check that rotor detection systems recognize the rotor type
- Inspect the exterior for any cosmetic or structural damage that could affect performance or safety
- Check the door mechanism alignment to ensure secure and smooth opening and closing
- Inspect and replace the gas strut with an OEM part to maintain proper door support and safety
- Examine the rotor chamber bowl for dents or damage and replace as needed to ensure safe operation
- Replace and confirm full functionality of all lid lock switches to maintain secure closure
- Inspect and lubricate the door lock mechanism, applying grease to the lid lock rail for smooth operation
- Test compressor functionality (if applicable) to ensure proper operation and consistent temperature control
- Conduct an 8-12 hour cycle test to validate consistent performance over prolonged use
- Confirm rotor motor stability, check for unusual noise, and assess mechanical integrity during operation
- Inspect the condensation drain and clear any clogs to prevent moisture buildup in the rotor chamber
- Verify RPM accuracy using an NIST-traceable tachometer and perform calibration as necessary
- Check the centrifuge error log to ensure zero recorded issues, confirming system reliability
Technician Inspection and Recertification Checklist: Centrifuges
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
| Task |
Completed? |
Remarks? |
| Confirm power supply output voltages match specified requirements |
Completed |
|
| Measure and verify voltages at PCB test points for accuracy |
Completed |
|
| Confirm rotor compatibility and detection for proper identification |
Completed |
|
| Inspect exterior for cosmetic or structural damage |
Completed |
|
| Check door mechanism alignment for secure opening and closing |
Completed |
|
| Inspect and replace gas strut with OEM part as needed |
Completed |
|
| Examine rotor chamber for dents or damage and replace if necessary |
Completed |
|
| Replace and confirm functionality of all lid lock switches |
Completed |
|
| Lubricate door lock mechanism and lid lock rail for smooth operation |
Completed |
|
| Test compressor (if applicable) for proper operation and cooling |
Completed |
|
| Run 8-12 hour cycle test to ensure consistent performance |
Completed |
|
| Check rotor motor for stability, noise, and integrity |
Completed |
|
| Inspect and clear condensation drain to prevent buildup |
Completed |
|
| Verify RPM accuracy with NIST traceable tachometer and calibrate |
Completed |
|
| Check centrifuge error log for zero recorded issues |
Completed |
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
