Stock Notification!

The Thermo Scientific Revco UGL2320A Lab Freezer you were interested in is currently unavailable, but we have a great alternative for you!

Our Price: $2,995.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 3 to 5 Business Days
Included Documentation: NIST Calibration and Preventative Maintenance Report

Request a Formal Quote

Quantity in Stock:1

Product Code: TSR-ULT3030A

Qty:

Description

Recertification Protocol

Technical Specification Sheet

Thermo Scientific Revco ULT3030A20 -30C Lab Freezer

The Thermo Scientific Revco ULT3030A20 is a high-performance laboratory freezer, specifically designed to meet the rigorous storage requirements of medical and scientific applications. This unit is ideal for preserving a variety of laboratory materials including reagents, pharmaceuticals, biologicals, primers, and more. With a preset temperature of -30°C and a spacious 29.2 cubic feet (826L) capacity, it ensures optimal storage conditions. Key features of the Revco ULT3030A include a non-invasive automatic defrost method with a time and temperature guided cycle, as well as forced air circulation for uniform temperature and fast door opening recovery. The freezer is equipped with adjustable, epoxy-coated wire shelves, with the option of drawers, ensuring versatile storage solutions. Safety and security are enhanced by a keyed on/off switch with setpoint security, a self-closing door with a 90° stop position, and built-in remote alarm contacts.

User convenience is addressed through its icon-based control panel and a large, easy-to-read digital display that shows temperature variations within 1°C. The graphic thermometer indicator provides visual alerts for overtemperature and under-temperature conditions. Additional features include audible/visual warnings, a push-button alarm test, and a controller battery backup system. The freezer's construction is robust, featuring scratch-resistant cold-rolled steel interior and exterior finishes, and high-density, 2-inch-thick CFC-free urethane foam insulation, which guards against ambient temperature fluctuations. The CFC-free, HFC-blend refrigerant is environmentally friendly. The unit stands on four casters for easy mobility, with the front two being lockable.

All of our equipment is fully tested to perform at factory specifications before being shipped.

INCLUDED:
The Thermo Scientific Revco ULT3030A20 -30C Lab Freezer includes:

> Key
> 4 x Shelves
> NIST Calibration and Preventative Maintenance Report
> Power Cord
> Operator's Manual
> Full 180 Day Parts and Labor Warranty

Thermo Scientific Revco ULT3030A20 -30C Lab Freezer Specifications

Temperature Range	-30°C Preset
Volume	29.2 cu. ft. (826L)
Refrigerant	R134A & R404A
Defrost Method	Automatic
Internal Dimensions (H x D x W)	58 x 29 x 30 in. (147.3 x 73.7 x 76.2 cm)
External Dimensions (H x D x W)	79.2 x 37.2 x 34 in. (201.2 x 94.5 x 86.4 cm)
Weight	445 lb. (197 kg.)
Electrical Requirements	115V, 60Hz, 16A

Downloads

Technical Specification Download

Operator's Manual Download

Request a Formal Quote

Recertification Inspection Protocol

Inspect the display for pixel clarity and brightness, replacing any dim or dead pixels.
Test all buttons for responsiveness, resistance, and durability; replace any that don’t meet standards.
Check the door seal and lock for airtightness, replacing any compromised components.
Run diagnostics on PCB test points for voltage and current accuracy, replacing faulty components.
Verify compressor output and airflow, ensuring all internal fans function properly.
Cross-check internal temperature probe accuracy with a NIST-traceable probe, recalibrating if needed.
Inspect wiring for frays or tears, replacing compromised sections as necessary.
Test the start capacitor's capacitance and replace if it’s outside the specified range.
Replace all internal filters and thoroughly clean condenser fins for efficient heat dissipation.
Verify the alarm battery holds a full charge and replace if there is any degradation.
Operate the unit for 72 hours to confirm stable temperatures and operational consistency.
Perform a final cosmetic check, repairing or touching up surfaces as needed for a professional appearance.

Technician Inspection and Recertification Checklist

The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment

Task	Completed?	Remarks?
Inspect display for pixel issues and replace if needed	Completed
Test button functionality and replace any defective buttons	Completed
Examine door seal and lock functionality; replace if compromised	Completed
Conduct PCB test point diagnostics and replace as needed	Completed
Verify compressor and internal fan functionality	Completed
Confirm temperature probe accuracy with NIST-traceable probe	Completed
Inspect all wiring for frays, tears, or breakages	Completed
Test start capacitor capacitance range; replace if needed	Completed
Replace all internal filters and clean condenser fins	Completed
Test alarm battery for full functionality	Completed
Run 72-hour test with data recorder to confirm stable temperatures	Completed
Conduct cosmetic inspection and address any issues	Completed