Stock Notification!

The Thermo Scientific Haake SC100 Heated Immersion Circulator you were interested in is currently unavailable, but we have a great alternative for you!

Our Price: $595.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 1 to 3 Business Days

Request a Formal Quote

Quantity in Stock:1

Product Code: TSH-SC100

Qty:

Description

Recertification Protocol

Technical Specification Sheet

Thermo Scientific Haake SC100 Heated Immersion Circulator

The Thermo Scientific Haake SC100 Heated Immersion Circulator is a high-performance tool designed for use with both refrigerated and heated baths, with the capability to pump to external systems. This model is tailored for precision and ease of use, featuring a digital display and touch pad that simplifies operation. It supports five programmable setpoint temperatures, ensuring versatility for various applications. The SC100 is equipped with both acoustic and optical alarms for enhanced operational safety and is specifically designed to work with water or glycol-water mixtures. It offers a temperature range from Ambient +13°C to 100°C, maintaining a temperature stability of ± 0.02°C. With a 1200W heater capacity, it accommodates immersion depths from 3 to 5.7 inches (75 to 145 cm), providing flexibility for different bath sizes. The circulator achieves a maximum flow rate of 17 liters per minute (4.5 gallons per minute) and includes two pump speed steps to adjust flow rate as needed. Its maximum pressure capability is 300 mbar (4.35 psi), highlighting its efficient fluid management for a wide range of laboratory applications.

All of our equipment will be fully tested to perform at factory specifications before being shipped.

INCLUDED:
The Thermo Scientific Haake SC100 Heated Immersion Circulator includes:

> Power Cord
> Operator's Manual
> Full 180 Day Parts and Labor Warranty

Thermo Scientific Haake SC100 Heated Immersion Circulator Specifications

Temperature Range	Ambient +13°C to 100°C
Temperature Stability	± 0.02°C
Heater Capacity	1200W
Immersion Depth	3 to 5.7 in. (75 to 145 cm)
Maximum Flow Rate	17L/min (4.5 gpm)
Maximum Pressure	300 mbar (4.35 psi)
Pump Speed Steps	2
Dimensions (H x W x D)	13.2 x 5.4 x 7.8 in. (33.6 x 13.8 x 19.9 cm)
Weight	7.3 lb. (3.3 kg)
Electrical Requirements	115V, 60Hz, 1 Ph

Downloads

Technical Specification Download

Operator's Manual Download

Request a Formal Quote

Recirculating Chiller Inspection and Recertification Checklist

Inspect display for dimming or dead pixels and replace as necessary to maintain clear visual feedback
Verify functionality of all buttons and input devices, ensuring reliable and responsive control
Check that all external hosing connections are secure and properly installed to prevent leakage
Test unit flow rate on a closed-loop system to confirm consistent fluid dynamics
Examine all external surfaces for leaks, confirming a sealed and contained system
Inspect internal components for any signs of leaks to ensure system integrity
Verify power supply output for accurate voltage delivery per operational specifications
Inspect all internal wiring, checking for any frays, tears, or compromised insulation
Replace internal filters to maintain optimal fluid purity and system performance
Confirm that the fan operates at proper speeds to provide effective cooling
Verify compressor functionality for consistent performance and cooling efficiency
Test cooling capacity, confirming it meets performance specifications at 20°C
Measure water pump output to confirm correct PSI for stable fluid flow
Determine the lowest achievable temperature, verifying against manufacturer standards
Ensure cosmetic condition meets standards with no damage affecting functionality or aesthetics

Technician Inspection and Recertification Checklist: Recirculating Chiller

The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment

Task	Completed?	Remarks?
Inspect display for dimming or dead pixels, replace if necessary	Completed
Verify functionality of all buttons and input devices	Completed
Ensure external hosing connections are secure	Completed
Test flow rate on closed-loop system	Completed
Inspect for external leaks	Completed
Inspect for internal leaks	Completed
Verify power supply output voltage	Completed
Inspect internal wiring for frays or tears	Completed
Replace internal filters	Completed
Confirm fan functionality	Completed
Verify compressor functionality	Completed
Test cooling capacity at 20°C	Completed
Confirm water pump PSI output	Completed
Determine lowest achievable temperature	Completed
Ensure cosmetic condition meets standards	Completed