Home > Incubator Shakers >

Thermo MaxQ 4450 Orbital Incubator Shaker

Net 30 Terms and Financing Available

Our Price: $4,195.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 3 to 5 Business Days
Included Documentation: NIST Calibration and Preventative Maintenance Report

Request a Formal Quote

Quantity in Stock:1

Product Code: T-MAXQ4450

Qty:

Description

Recertification Protocol

Technical Specification Sheet

Thermo MaxQ 4450 Orbital Incubator Shaker

The Thermo MaxQ 4450 combines orbital shaking technology with a small footprint benchtop design for a versatile shaker ideal for cell culture, solubility studies, extraction procedures, protein expression, and many other applications. The MaxQ 4450 features shaking speeds from 40 to 400 RPM around a 0.75 inch orbit with a temperature range of 5C above ambient to 80C. Includes 11 x 13 inch platform for vessel capacity up to four 1L flasks. The MaxQ 4450's clear, scratch-resistant lid allows for unobstructed sample viewing without disturbing the chamber. PID temperature controller provides 0.1C temperature accuracy at 37C, and an independent over temperature feature provides a backup temperature controller for added safety.

This incubator shaker will be fully tested to perform at factory specifications before being shipped.

INCLUDED:
The Thermo MaxQ 4450 Orbital Incubator Shaker includes:

> 11" x 13" Platform
> NIST Calibration and Preventative Maintenance Report
> Power Cord
> Operator's Manual
> Full 180 Day Parts and Labor Warranty

Thermo MaxQ 4450 Orbital Incubator Shaker Specifications

Speed Range	40 to 400 RPM
Temperature Range	Ambient +5C to 80C
Temperature Accuracy	0.1C
Orbit	1.9 cm (0.75 in)
Load Capacity	35 lbs (15.9 kg)
Capacity	4 x 1L flasks
Platform Dimensions (L x W)	11 x 13 in (28 x 33 cm)
Overall Dimensions (L x W x H)	27.2 x 14.1 x 15.8 in (69.1 x 35.8 x 40.1 cm)
Electrical Requirements	120V, 50/60Hz

Thermo MaxQ 4450 Manual

Click Here to View all the Technical Specs for the MaxQ 4450

Request a Formal Quote

Thermo MaxQ 4450 Orbital Incubator Shaker

Inspection and Recertification Checklist

Examine the chamber glass for cracks or chips, replacing it as needed to maintain structural integrity.
Inspect door seals for signs of wear or damage, replacing them to ensure a tight seal.
Check the display for brightness and clarity, replacing any dim or dead pixels to maintain optimal visibility.
Test all buttons to confirm full functionality and consistent responsiveness.
Replace all platform assembly bearings to ensure smooth and reliable motion.
Inspect the drive belt for wear, replacing it if torn or cracked to maintain performance.
Examine all wiring for frays, tears, or breakages, addressing any issues for electrical safety.
Verify each PCB test point, replacing any malfunctioning components to ensure system reliability.
Check drive belt tension to confirm correct alignment and function.
Confirm the compressor’s operation, cleaning condenser filter and fins for efficient cooling.
Calibrate internal temperature accuracy using an NIST-traceable temperature probe.
Measure and calibrate platform RPMs with an NIST-traceable tachometer to ensure precision.
Conduct a final cosmetic inspection to verify all surfaces meet appearance standards.

Technician Inspection and Recertification Checklist

The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment

Task	Completed?	Remarks?
Examine chamber glass for cracks or chips, replace as needed	Completed
Inspect door seals for wear, replace to ensure tight seal	Completed
Check display brightness, replace dim or dead pixels	Completed
Test all buttons for full functionality and responsiveness	Completed
Replace platform assembly bearings for reliable motion	Completed
Inspect drive belt for wear, replace if torn or cracked	Completed
Examine wiring for frays or breakages, repair as needed	Completed
Verify PCB test points, replace faulty components	Completed
Check drive belt tension for proper alignment	Completed
Confirm compressor functionality, clean filter and fins	Completed
Calibrate internal temperature with NIST probe	Completed
Calibrate platform RPM with NIST-traceable tachometer	Completed
Conduct cosmetic inspection for appearance standards	Completed