Home > Freezers >

Thermo Fisher Revco ULT430A Under Counter Freezer

Our Price: $1,955.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 3 to 5 Business Days

Request a Formal Quote

Quantity in Stock:1

Product Code: TFR-30

Qty:

Description

Recertification Protocol

Technical Specification Sheet

Thermo Fisher Revco ULT430A Under Counter Freezer

The Thermo Fisher Revco ULT430A Under Counter Freezer is a high-performance, microprocessor-controlled -30C freezer. The ULT430A features auto-defrost and condensate removal with forced-air directional air flow to ensure temperature uniformity and quick temperature recovery designed for medical and scientific applications.

The ULT430A is ideal for use with reagents, plasma, biologicals, pre-freezing, vaccines, pharmaceuticals, and general test samples and storage.

INCLUDED:
The Thermo Fisher Revco ULT430A Under Counter Freezer includes:

> Shelves
> Power Cord
> Operator's Manual
> Full 180 Day Parts and Labor Warranty

Thermo Fisher Revco ULT430A Under Counter Freezer Specifications

Temperature Range	-30C constant temp
Volume	4.9 cu. ft.
Interior Dimensions (H x W x D)	20 x 20 x 20 in
Exterior Dimensions (H x W x D)	33.4 x 24 x 26 in
Defrost	Auto
Electrical	115V, 60Hz

Click Here to View all the Technical Specs for the ULT430A

Request a Formal Quote

Recertification Inspection Protocol

Inspect the display for pixel clarity and brightness, replacing any dim or dead pixels.
Test all buttons for responsiveness, resistance, and durability; replace any that don’t meet standards.
Check the door seal and lock for airtightness, replacing any compromised components.
Run diagnostics on PCB test points for voltage and current accuracy, replacing faulty components.
Verify compressor output and airflow, ensuring all internal fans function properly.
Cross-check internal temperature probe accuracy with a NIST-traceable probe, recalibrating if needed.
Inspect wiring for frays or tears, replacing compromised sections as necessary.
Test the start capacitor's capacitance and replace if it’s outside the specified range.
Replace all internal filters and thoroughly clean condenser fins for efficient heat dissipation.
Verify the alarm battery holds a full charge and replace if there is any degradation.
Operate the unit for 72 hours to confirm stable temperatures and operational consistency.
Perform a final cosmetic check, repairing or touching up surfaces as needed for a professional appearance.

Technician Inspection and Recertification Checklist

The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment

Task	Completed?	Remarks?
Inspect display for pixel issues and replace if needed	Completed
Test button functionality and replace any defective buttons	Completed
Examine door seal and lock functionality; replace if compromised	Completed
Conduct PCB test point diagnostics and replace as needed	Completed
Verify compressor and internal fan functionality	Completed
Confirm temperature probe accuracy with NIST-traceable probe	Completed
Inspect all wiring for frays, tears, or breakages	Completed
Test start capacitor capacitance range; replace if needed	Completed
Replace all internal filters and clean condenser fins	Completed
Test alarm battery for full functionality	Completed
Run 72-hour test with data recorder to confirm stable temperatures	Completed
Conduct cosmetic inspection and address any issues	Completed