Home > Microplate Washers >

Tecan PW 384 Power Plate Washer

Net 30 Terms and Financing Available

Our Price: $4,230.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 3 to 5 Business Days

Request a Formal Quote

Quantity in Stock:

Product Code: T-PW384

Qty:

Email me when Back-In-Stock

Description

Recertification Protocol

Technical Specification Sheet

Tecan PW 384 Power Plate Washer

The Tecan Power Washer 384 is a plate washer for cellular assays as well as ELISA essays in both 384 and 96 well plate format via changeable wash heads. This plate washer comes with a 96 well wash head which utilizes both an aspiration and a dispensing needle per well for simultaneous processing of the entire plate.The PW 384 can use up to 50 wash programs with up to 50 steps each. It can also store up to 15 plate types with 13 user-defined and 2 reference plates. Adjustable wash head height, dispensing speeds (from 1 to 5), and standard or high vacuum levels allow for application-defined performance.

Applications includes assay development, high throughput screening, secondary screening, and quality control of microplates.

This Tecan PW 384 plate washer is in excellent condition and is tested to perform at factory specifications.

INCLUDED:
The Tecan PW 384 Power Plate Washer includes:

> 96 Well Wash Head
> Power Cord
> Operator's Manual
> Full 180 Day Parts and Labor Warranty

Tecan PW 384 Power Plate Washer Specifications

Dispense Volume Range	96 well plate format: 50 to 3000 ul in 50 ul for washing 384 well plate format: 10 to 1000 ul for washing
Dispensing Accuracy	96 well plates: CV ? 2% across the plate at 300 ul 384 well plates: CV ? 3% across the plate at 100 ul
Residual Volume	96 well plates: ? 2 ul across the plate 384 well plates: ? 2 ul across the plate
Display Unit	Liquid crystal display with two rows of sixteen digits
Number of Intake Channels	3
Wash Program Storage	Up to 20
Dimensions (W x D x H)	38 x 41.5 x 24 cm

Tecan PW 384 Manual

Click Here to View the Technical Specs for the PW 384

Request a Formal Quote

Microplate Washer Installation and Inspection Checklist

Install new waste and buffer bottles to ensure proper fluid containment and system functionality.
Integrate a new pump into the system, verifying compatibility and secure connections.
Verify that the power supply and PCB output the correct voltages for reliable component operation.
Conduct a self-test on the microplate washer, evaluating all operational parameters.
Inspect the X-axis motor belt for signs of wear, such as tears, frays, or breakages, replacing if necessary.
Examine dispense and aspirate tubes for any damage that could affect fluid flow accuracy.
Confirm internal pump functionality, replacing seals as needed to maintain optimal performance.
Inspect all internal wiring for frays, tears, or breakages, addressing any faults for electrical safety.
Verify functionality of all internal and external sensors, ensuring accurate readings across the unit.
Disinfect the unit using an appropriate disinfection cycle to ensure sterility and safety.
Check that residual aspiration levels are within the manufacturer’s specified limits for accuracy.
Conduct a final cosmetic inspection to verify that all external surfaces meet appearance standards.

Technician Inspection and Recertification Checklist: Microplate Washer

The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment

Task	Completed?	Remarks?
Install new waste and buffer bottles	Completed
Integrate new pump into system, verifying secure connections	Completed
Verify power supply and PCB output correct voltages	Completed
Conduct microplate washer self-test and evaluate results	Completed
Inspect X-axis motor belt for wear, replacing if necessary	Completed
Examine dispense and aspirate tubes for any damage	Completed
Confirm internal pump functionality, replace seals as needed	Completed
Inspect internal wiring for frays, tears, or breakages	Completed
Verify functionality of all internal and external sensors	Completed
Disinfect unit with appropriate disinfection cycle	Completed
Check residual aspiration levels meet specifications	Completed
Conduct cosmetic inspection for appearance standards	Completed