 |
 |
 |
|
Scilogex SCI1000-S Thermal Cycler
The Scilogex SCI1000-S Thermal Cycler delivers high performance, high throughput with easy programming via the color LCD touch screen display. The programmable functions are available in 30 segments with a maximum of 99 cycles. The Scilogex SCI1000-S Thermal Cycler provides for excellent temperature uniformity and high-speed ramping rates with outstanding heat conductivity. This equipment is ideal for use with 96 x 0.2mL PCR tubes or 96-well plates. All of our equipment is fully tested to perform at factory specifications before being shipped.
The Scilogex SCI1000-S Thermal Cycler includes:
- > 96 Well Block
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Scilogex SCI1000-S Thermal Cycler Specifications
|
Thermal Range
|
4°C to 105°C
|
|
Thermal Accuracy
|
± 0.3°C at 55°C
|
|
Thermal Uniformity
|
< 0.3°C at 55°C
|
|
Ramping Rate
|
3°C/sec
|
|
Sample Capacity
|
96 x 0.2 ml PCR tubes or 96-well plate
|
|
Memory
|
Maximum of 30 segments / 99 cycles
|
|
Gradient Function
|
No
|
|
Block Material
|
Aluminum
|
|
Display
|
7" LCD 800x480 touch panel
|
|
Power Off Protection
|
Yes
|
|
Dimensions (W x D x H)
|
11 x 14.6 x 9.8 in. (28 x 37 x 25 cm)
|
|
Weight
|
24.3 lb. (11 kg.)
|
|
Electrical Requirements
|
100-240 VAC, 50/60Hz
|
- Validate that the power supply and PCB consistently deliver accurate, stable voltages across all circuits and connections, confirming operational reliability
- Thoroughly inspect the display for any dim, flickering, or dead pixels, replacing compromised segments to ensure clear visibility and precise data display
- Verify complete functionality and responsiveness of all buttons and knobs, confirming accurate and reliable input across all controls
- Ensure the machine completes all internal diagnostic checks with zero errors, indicating system readiness and functional integrity
- Confirm the machine accurately identifies attached blocks (96-well, dual 48, etc.), with seamless recognition across different configurations
- Conduct a detailed inspection of internal wiring and all electrical connections, checking for any signs of breaks, disconnections, or tears; replace or repair any underperforming components
- Examine the connector between the block and base for bent or broken pins, replacing as needed to maintain secure, reliable connections
- Calibrate well temperatures with a NIST-traceable thermometer, verifying accuracy and uniformity across all wells to meet specification standards
- Perform a comprehensive cosmetic inspection, ensuring all exterior surfaces and components are free of damage, wear, or defects, maintaining aesthetic and professional quality
Technician Inspection and Recertification Checklist: Thermal Cycler
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Validate stable, accurate voltage outputs from power supply and PCB across circuits
|
Completed
|
|
|
Inspect display for dim, flickering, or dead pixels; replace as needed for clarity
|
Completed
|
|
|
Verify functionality and responsiveness of all buttons and knobs
|
Completed
|
|
|
Confirm machine completes internal diagnostics with zero errors
|
Completed
|
|
|
Ensure accurate block identification across configurations (96-well, dual 48, etc.)
|
Completed
|
|
|
Inspect internal wiring and connections for integrity; repair or replace as needed
|
Completed
|
|
|
Check connector between block and base for bent or broken pins; replace as necessary
|
Completed
|
|
|
Calibrate well temperatures with a NIST-traceable thermometer for accuracy
|
Completed
|
|
|
Conduct cosmetic inspection to ensure quality and professionalism of all surfaces
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
