Home > Freezers >

Sanyo MDF-U32V Ultra-Low Temperature Freezer

Net 30 Terms and Financing Available

Our Price: $5,475.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 3 to 5 Business Days

Request a Formal Quote

Quantity in Stock:

Product Code: MDF-U32V

Qty:

Email me when Back-In-Stock

Description

Recertification Protocol

Technical Specification Sheet

Sanyo MDF-U32V Ultra-Low Temperature Freezer

The Sanyo MDF-U32V Ultra-Low Temperature Freezer features Sanyo's superior cooling technology which ensures the most accurate interior storage conditions possible. It's vast and concise collection of alarm functions ensures the safety of your samples is maintained. The new status alert monitors both ambient and system conditions and will notify the user of any abnormal conditions. Insulated inner doors prevent any leakage of cool air, and therefore help to maintain inner temperatures reached. The MDF-U32V also incorporates VIP (vacuum insulated panel) technology that uses compressed layers of open cell foam insulation under vacuum to reduce Freezer wall thickness, resulting in compact Freezers with spacious interiors. This freezer can reach temperatures as low as -86C and has an interior capacity of 333L.

All of our equipment is fully tested to perform at factory specifications before being shipped.

INCLUDED:
The Sanyo MDF-U32V Ultra-Low Temperature Freezer includes:

> Power Cord
> Operator's Guide
> Full 180 Day Parts and Labor Warranty

Sanyo MDF-U32V Ultra-Low Temperature FreezerSpecifications

External Dimensions (W x D x H)	670 x 875 x 1860 (mm)
Internal Dimensions (W x D x H)	490 x 600 x 1140 (mm)
Cooling Performance	-86C (ambient temperature; 30C, no load)
Temperature Control Range	-50C to -86C
Noise Level	49 dB
Maximum Pressure	1.9 MPa
Capacity	333 L
Shelf	Stainless steel, 3 shelves (adjustable) W 464 x D 535 (mm), Load; 50 kg/shelf
Refrigerant	R-407D (high stage), R-508 (low stage)

Sanyo MDF-U32V Freezer Manual

Click Here to View all the Technical Specs for the Sanyo MDF-U32V

Request a Formal Quote

Recertification Inspection Protocol

Inspect the display for pixel clarity and brightness, replacing any dim or dead pixels.
Test all buttons for responsiveness, resistance, and durability; replace any that don’t meet standards.
Check the door seal and lock for airtightness, replacing any compromised components.
Run diagnostics on PCB test points for voltage and current accuracy, replacing faulty components.
Verify compressor output and airflow, ensuring all internal fans function properly.
Cross-check internal temperature probe accuracy with a NIST-traceable probe, recalibrating if needed.
Inspect wiring for frays or tears, replacing compromised sections as necessary.
Test the start capacitor's capacitance and replace if it’s outside the specified range.
Replace all internal filters and thoroughly clean condenser fins for efficient heat dissipation.
Verify the alarm battery holds a full charge and replace if there is any degradation.
Operate the unit for 72 hours to confirm stable temperatures and operational consistency.
Perform a final cosmetic check, repairing or touching up surfaces as needed for a professional appearance.

Technician Inspection and Recertification Checklist

The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment

Task	Completed?	Remarks?
Inspect display for pixel issues and replace if needed	Completed
Test button functionality and replace any defective buttons	Completed
Examine door seal and lock functionality; replace if compromised	Completed
Conduct PCB test point diagnostics and replace as needed	Completed
Verify compressor and internal fan functionality	Completed
Confirm temperature probe accuracy with NIST-traceable probe	Completed
Inspect all wiring for frays, tears, or breakages	Completed
Test start capacitor capacitance range; replace if needed	Completed
Replace all internal filters and clean condenser fins	Completed
Test alarm battery for full functionality	Completed
Run 72-hour test with data recorder to confirm stable temperatures	Completed
Conduct cosmetic inspection and address any issues	Completed