 |
MJ Research PTC-200 Gradient Thermal Cycler
Thermal Range
5°C to 105°C
Ramping Speed
Up to 3C/sec
- NIST-traceable accuracy.
- Compatible with various block types: 96-well, 384-well, 60 well, dual 48 well, and specialty blocks like the insitu.
- Hot Bonnet heated lid for oil-free cycling, with adjustable pressure and height.
- Large, built-in memory and advanced software for comprehensive thermal parameter control.
- Intuitive, user-friendly interface for programming, editing, and file management.
- Password protection feature.
- Instant Incubate function for continuous temperature incubations.
The MJ Research PTC-200 Gradient Thermal Cycler is a
reliable peltier thermocycler with swappable alpha blocks. This gradient cycler
is equipped with interchangeable sample blocks and heat pump assemblies, which
allow users to easily change formats in between runs while maintaining
NIST-traceable accuracy. This PTC-200 comes with a
96-well alpha block, but can also be operated with 384-well blocks, 60 well blocks, dual 48 well blocks, and many others, including specialty blocks like the insitu. The Hot Bonnet heated lid
fitted onto the PTC-200 thermal cycler controls pressure and height, enabling
oil-free cycling. The MJ Research PTC-200 also has a large built-in memory and
software that allows control over virtually every thermal parameter. Intuitive software and easy-to-read interface enables quick and painless programming, editing, file management, password protection, and more.The PTC-200 also features Instant Incubate for continuous temperature incubations.
This thermal cycler is in excellent condition, and all of our equipment is fully tested to perform at factory
specifications before being shipped.
The MJ Research PTC-200 Gradient Thermal Cycler includes:
- > NIST Traceable Calibration Certificate
- > 96-well Alpha Block
- > Power Cord
- > Operator's Guide
- > Full 180 Day Parts and Labor Warranty
MJ Research PTC-200 Gradient Thermal Cycler Specifications
|
Thermal Range
|
5°C to 105°C, but no more than 30C below ambient temperature (4°C to 100°C for the slide Chambers Alpha Unit)
|
|
Thermal Accuracy
|
± 0.3°C of programmed target at 90°C- NIST-traceable
|
|
Thermal Homogeneity
|
± 0.4°C well-to-well within 30 seconds of arrival at 90°C (for most Alpha units; see specifications for individual Alpha Units)
|
|
Parrallel
|
1x 25-pin 8-bit parallel interface printer port
|
|
Serial
|
1x 9-pin RS-232 serial port for printer or remote use
|
|
IEEE
|
1x IEEE-488 bidirectional general purpose interface bus
|
|
Display
|
1x 20 x 4 LCD alphanumeric display
|
|
Dimensions (W x L x H)
|
12 x 12 x 12 in
|
|
Weight
|
25 lbs
|
MJ Research PTC-200 Manual
We also carry the PTC-100, PTC-150, PTC-225, and PTC-240.  Click Here to View all the Technical Specs for the PTC-200
- Validate that the power supply and PCB consistently deliver accurate, stable voltages across all circuits and connections, confirming operational reliability
- Thoroughly inspect the display for any dim, flickering, or dead pixels, replacing compromised segments to ensure clear visibility and precise data display
- Verify complete functionality and responsiveness of all buttons and knobs, confirming accurate and reliable input across all controls
- Ensure the machine completes all internal diagnostic checks with zero errors, indicating system readiness and functional integrity
- Confirm the machine accurately identifies attached blocks (96-well, dual 48, etc.), with seamless recognition across different configurations
- Conduct a detailed inspection of internal wiring and all electrical connections, checking for any signs of breaks, disconnections, or tears; replace or repair any underperforming components
- Examine the connector between the block and base for bent or broken pins, replacing as needed to maintain secure, reliable connections
- Calibrate well temperatures with a NIST-traceable thermometer, verifying accuracy and uniformity across all wells to meet specification standards
- Perform a comprehensive cosmetic inspection, ensuring all exterior surfaces and components are free of damage, wear, or defects, maintaining aesthetic and professional quality
Technician Inspection and Recertification Checklist: Thermal Cycler
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Validate stable, accurate voltage outputs from power supply and PCB across circuits
|
Completed
|
|
|
Inspect display for dim, flickering, or dead pixels; replace as needed for clarity
|
Completed
|
|
|
Verify functionality and responsiveness of all buttons and knobs
|
Completed
|
|
|
Confirm machine completes internal diagnostics with zero errors
|
Completed
|
|
|
Ensure accurate block identification across configurations (96-well, dual 48, etc.)
|
Completed
|
|
|
Inspect internal wiring and connections for integrity; repair or replace as needed
|
Completed
|
|
|
Check connector between block and base for bent or broken pins; replace as necessary
|
Completed
|
|
|
Calibrate well temperatures with a NIST-traceable thermometer for accuracy
|
Completed
|
|
|
Conduct cosmetic inspection to ensure quality and professionalism of all surfaces
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
Good Products 
