 |
 |
 |
|
Popular Alternative Choice
Polyscience WBE05A11B 5L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz
- Designed for diverse lab procedures: incubation, inactivation, and more.
- PID microprocessor control for precise heat management.
- Features: Displays actual/set point temperature, integrated timer, calibration.
- Included: Power Cord, Operator's Guide, Documentation, 2-Year Warranty.
Go to Product Details
Free Shipping!
Precision 280 Digital Water Bath
Temperature Range
Ambient +5C to 99.9C
Temperature Uniformity
0.2C at 37C
- Designed for use in research and quality control offering precise temperature control and stability.
- Microprocessor Control Panel includes all necessary functions for operation, with push-button keys and a single display window.
- The Proportional Integral Derivative (PID) ensures precise temperature regulation.
- High Limit Temperature Cutout activates if the sensor detects a temperature 5°C higher than the set temperature, and the heater will be stopped from operating.
Precision Baths are commonly used in research and quality control. They offer excellent temperature uniformity and stability, making them ideal for legal or reference tests. The interior of the bath is constructed of stainless steel and is designed for operation with distilled water or water solutions, while the body is made from galvanized steel and painted for added protection. The Precision 280 Digital Water Bath in excellent condition. All of our equipment will be fully tested to perform at factory specifications before being shipped.
The Precision 280 Digital Water Bath includes:
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Precision 280 Digital Water Bath Specifications
|
Temperature Range
|
Ambient +5 to 99.9C
|
|
Temperature Uniformity
|
0.2C at 37C
|
|
Control
|
Digital
|
|
Capacity
|
1.5L (0.4 gal)
|
|
Bath Dimensions (L x W x H)
|
6 x 11.5 x 2 in (15.2 x 29.2 x 5.1 cm)
|
|
Electrical Requirements
|
120V, 50/60Hz, 2A, 225W
|
|
Temperature Sensitivity
|
0.1C
|
Precision 280 Water Bath Manual
 Click Here to View all the Technical Specs for the Precision 280
- Confirm power supply and PCB are outputting stable, correct voltages across all essential circuits to ensure reliable operation
- Inspect the display for any dim, flickering, or dead pixels, replacing any compromised sections to maintain full clarity and accurate readouts
- Verify that all buttons, knobs, and switches are functioning properly, providing precise and responsive control across all settings
- Conduct a thorough inspection of the water reservoir for any holes, rust, or other structural damage that may impact its integrity
- Fill the reservoir with water, checking closely for any external or internal leaks that could affect performance
- Examine the lid for any signs of wear or damage, replacing hinges and handles if necessary to ensure a secure and proper seal
- Inspect for any internal leaks originating from the water reservoir, confirming the unit’s internal plumbing integrity
- Conduct a comprehensive inspection of internal wiring for any breakages, tears, or wear; replace any underperforming or damaged components to maintain safe operation
- Examine internal insulation for signs of burns, breaks, or deterioration, replacing as needed to ensure thermal efficiency and safety
- Confirm that all feet are intact and that the bath sits level and balanced on a flat surface to prevent movement or instability
- Calibrate both temperature accuracy and uniformity using a NIST-traceable temperature probe, verifying compliance with specification standards
- Perform a detailed cosmetic inspection to confirm that all external surfaces and finishes meet aesthetic and quality standards
Technician Inspection and Recertification Checklist: Water Bath
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Confirm power supply and PCB output stable, correct voltages across circuits
|
Completed
|
|
|
Inspect display for dim, flickering, or dead pixels; replace for clarity
|
Completed
|
|
|
Verify functionality of all buttons, knobs, and switches for responsive control
|
Completed
|
|
|
Inspect water reservoir for holes, rust, or structural damage
|
Completed
|
|
|
Fill reservoir with water; check for external or internal leaks
|
Completed
|
|
|
Examine lid for wear or damage; replace hinges or handles as needed
|
Completed
|
|
|
Inspect for internal leaks from water reservoir to confirm plumbing integrity
|
Completed
|
|
|
Check internal wiring for damage; replace underperforming components for safety
|
Completed
|
|
|
Examine internal insulation for burns, breaks, or deterioration; replace as needed
|
Completed
|
|
|
Confirm feet are intact and bath is balanced on flat surface
|
Completed
|
|
|
Calibrate temperature accuracy and uniformity with NIST-traceable probe
|
Completed
|
|
|
Perform cosmetic inspection to confirm quality of external surfaces and finishes
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
