|
New Brunswick Innova 4000 Incubator Shaker
Temperature Range
5 above ambient to 60C
- Rigid temperature management ensures consistent and accurate temperature conditions for a variety of samples.
- Advanced agitation control offers precise regulation of shaking speed, accommodating a range of laboratory needs.
- Microprocessor controls provide uniform heating and motion, ensuring consistent results.
- Fail-safe thermostat prevents overheating, enhancing the device's reliability.
- Triple eccentric drive utilizes a counterweight system for stable operation, reducing vibration and extending the unit's life.
- 3-phase brushless ball bearing DC motor delivers high torque with quiet, efficient operation.
The New Brunswick Innova 4000 Incubator Shaker offers rigid
temperature and agitation control in a benchtop design. This large-capacity
shaker can culture a wide array of samples in test tubes and flasks up to 2.8 L.
The Innova 4000s microprocessor controls allow for uniform heating and motion
and accurate regulation of shaking speed, automatically compensating for
changes in temperature using a large capacity blower. The system includes many
safety feature, such as automatic cut-out when lid is opened, fail-safe thermostat
for high temperature, and standard audible and visual alarms with timer.
Recommended for various molecular biology techniques,
including hybridization studies, plasmid preps, DNA fingerprinting and more.
All of our equipment is fully tested to perform at factory
specifications before being shipped.
The New Brunswick Innova 4000 Incubator Shaker includes:
- > 18" x 18" Platform
- > NIST Calibration and Preventative Maintenance Report
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
New Brunswick Innova 4000 Incubator Shaker Specifications
Temperature Range
|
5 above ambient to 60C
|
Agitation
|
25 to 500 rpm, 1rpm
|
Platform Size
|
18 x 18 in
|
Maximum Capacity
|
18 x 250 mL flasks on universal platform
|
Orbital Diameter
|
0.75 in
|
Dimensions (W x D x H)
|
21 x 27.5 x 19.75 in
|
New Brunswick Innova 4000 Incubator Shaker Manual
Click Here to View all the Technical Specs for the Innova 4000
- Examine the chamber glass for cracks or chips, replacing it as needed to maintain structural integrity.
- Inspect door seals for signs of wear or damage, replacing them to ensure a tight seal.
- Check the display for brightness and clarity, replacing any dim or dead pixels to maintain optimal visibility.
- Test all buttons to confirm full functionality and consistent responsiveness.
- Replace all platform assembly bearings to ensure smooth and reliable motion.
- Inspect the drive belt for wear, replacing it if torn or cracked to maintain performance.
- Examine all wiring for frays, tears, or breakages, addressing any issues for electrical safety.
- Verify each PCB test point, replacing any malfunctioning components to ensure system reliability.
- Check drive belt tension to confirm correct alignment and function.
- Confirm the compressor’s operation, cleaning condenser filter and fins for efficient cooling.
- Calibrate internal temperature accuracy using an NIST-traceable temperature probe.
- Measure and calibrate platform RPMs with an NIST-traceable tachometer to ensure precision.
- Conduct a final cosmetic inspection to verify all surfaces meet appearance standards.
Technician Inspection and Recertification Checklist
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment
Task |
Completed? |
Remarks? |
Examine chamber glass for cracks or chips, replace as needed | Completed | |
Inspect door seals for wear, replace to ensure tight seal | Completed | |
Check display brightness, replace dim or dead pixels | Completed | |
Test all buttons for full functionality and responsiveness | Completed | |
Replace platform assembly bearings for reliable motion | Completed | |
Inspect drive belt for wear, replace if torn or cracked | Completed | |
Examine wiring for frays or breakages, repair as needed | Completed | |
Verify PCB test points, replace faulty components | Completed | |
Check drive belt tension for proper alignment | Completed | |
Confirm compressor functionality, clean filter and fins | Completed | |
Calibrate internal temperature with NIST probe | Completed | |
Calibrate platform RPM with NIST-traceable tachometer | Completed | |
Conduct cosmetic inspection for appearance standards | Completed | |
To View More of Our Recertification Protocol Click Here
|
|
|