 |
 |
 |
|
Popular Alternative Choice
Benchmark BT3001 Orbi-Shaker Orbital Shaker
- Powerful shaker with 14 lb capacity, speeds up to 300 RPM.
- Standard platform with non-slip surface; MAGic Clamp available.
- Operates between +4C to 65C with a 19mm orbit.
- Compact design: 11 x 13 x 3 in, 120V, 50/60Hz, 600W.
Go to Product Details
No Lead Time and Free Shipping!
New Brunswick Innova 2000 Platform Shaker
Platform Size
13 x 11 in (33 x 28 cm)
Speed Range
25 to 500 rpm
- The Innova 2000 is designed to be portable and suitable for benchtop use.
- A Triple Eccentric Counterbalanced Drive provides smooth and stable shaking motion in a horizontal plane.
- Proportional/Integral (PI) Microprocessor Controller with instantaneous digital feedback provides precise control.
- The shaker’s speed can be adjusted within 25 to 500 RPM, providing flexibility for various applications.
The New Brunswick Innova 2000 Platform Shaker is
perfect for ambient shaking conditions on the bench, in an incubator, or in a
warm or cold room. The New Brunswick triple-eccentric counterbalanced drive
with a broad-based cast-iron support mechanism allows for consistently
dependable operation, even with high-speed applications and heavy workloads. The
Innova 2000 microprocessor controls allow for uniform motion and accurate
regulation of shaking speed. This platform shaker is equipped with audio and
visual alarms and a timer (0.1 99.9 h) with continuous operation or automatic
shut-off.
All of our equipment is fully tested to perform at factory
specifications before being shipped.
The New Brunswick Innova 2000 Platform Shaker includes:
- > 13" x 11" Platform
- > NIST Calibration and Preventative Maintenance Report
- > Power Cord
- > Operator's Guide
- > Full 180 Day Parts and Labor Warranty
New Brunswick Innova 2000 Platform Shaker Specifications
|
Speed Control
|
1 RPM
|
|
Timer
|
0.1 to 99.9 h
|
|
Power Supply
|
120V, 50/60 Hz
|
|
Dimensions (W x D x H)
|
14 x 14.5 x 5.8 in. (35.5 x 37 x 14.6 cm)
|
|
Weight
|
33 lbs (15 kg)
|
|
Balanced Drive Mechanism
|
Triple-eccentric with permanently lubricated ball bearings
|
|
Motor Type
|
Solid state, DC brushless motor
|
|
Orbit
|
0.75 in (1.9 cm)
|
|
Platform Size
|
13 x 11 in (33 x 28 cm)
|
|
Speed Range
|
25 to 500 RPM
|
New Brunswick Innova 2000 Manual
 Click Here to View all the Technical Specs for the Innova 2000
New Brunswick Innova 2000 Shaker- Marshall Scientific
- Validate that the power supply and PCB deliver stable, correct voltage outputs across all necessary connections, ensuring reliable operation
- Thoroughly inspect the display for any dim, flickering, or dead pixels; replace affected elements to maintain full readability and operational clarity
- Test the full range of button functionality, confirming responsive, accurate input recognition across all settings
- Conduct a detailed inspection of bearings and bearing housing, identifying any worn or damaged bearings, and replace as needed to prevent operational disruption
- Examine the drive belt for signs of cracking, fraying, or material breakdown; replace as required to ensure sustained performance
- Measure and adjust motor drive belt tension to optimal specifications, securing reliable and efficient power transmission
- Verify accuracy of the onboard timer, confirming proper functionality and replacing if it deviates from expected performance
- Calibrate shaker rotation speed with a NIST-traceable tachometer, validating precision within specified operational limits
- Run the shaker continuously for an 8-12 hour testing period, closely observing the shaking platform for smooth, consistent motion, while monitoring for any error indicators such as knocking, skipping, or unusual vibrations
- Perform a comprehensive cosmetic inspection to confirm the device’s exterior meets aesthetic and quality standards, free from visible damage or wear
Technician Inspection and Recertification Checklist: Shakers
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Validate stable, correct voltage outputs from power supply and PCB
|
Completed
|
|
|
Inspect display for dim, flickering, or dead pixels; replace as needed
|
Completed
|
|
|
Test button functionality for responsiveness and accuracy across all settings
|
Completed
|
|
|
Inspect bearings and housing for wear; replace as needed to prevent disruption
|
Completed
|
|
|
Examine drive belt for cracking, fraying, or material breakdown; replace as required
|
Completed
|
|
|
Measure and adjust motor drive belt tension to optimal specifications
|
Completed
|
|
|
Verify onboard timer accuracy; replace if it deviates from expected performance
|
Completed
|
|
|
Calibrate shaker rotation speed using a NIST-traceable tachometer
|
Completed
|
|
|
Run 8-12 hour continuous test; observe platform for smooth, consistent motion
|
Completed
|
|
|
Perform comprehensive cosmetic inspection for quality standards compliance
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
