Home > Incubator Shakers >

New Brunswick Excella E24 Incubator Shaker

Net 30 Terms and Financing Available

Our Price: $5,385.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 3 to 5 Business Days
Included Documentation: NIST Calibration and Preventative Maintenance Report

Request a Formal Quote

Quantity in Stock:1

Product Code: NB-E24

Qty:

Description

Recertification Protocol

Technical Specification Sheet

New Brunswick Excella E24 Incubator Shaker

The New Brunswick Excella E24 Incubator Shaker is a large capacity incubator shaker that utilizes a UniCentric counter-balanced drive mechanism which provides horizontal plane rotary motion in a 0.75 in (1.9 cm) diameter circular orbit. A proportional/integral microprocessor controls the speed and temperature over the speed range of 50 to 400 RPM, as well as the temperature range of Ambient +7°C to 60C.

The Excella E24 can also be operated in two modes, continuously which operates at a set speed and temperature until user intervention, or timed mode which runs at a set speed, time, and temperature for a period of up to 99.9 hours. This incubator shaker is also equipped with audible and visual alarms to alert the user of setpoint deviations.

All of our equipment will be fully tested to perform at factory specifications before being shipped.

INCLUDED:
The New Brunswick Excella E24 Incubator Shaker includes:

> 18 x 18 in Platform
> NIST Calibration and Preventative Maintenance Report
> Power Cord
> Operator's Guide
> Full 180 Day Parts and Labor Warranty

New Brunswick Excella E24 Incubator Shaker Specifications

Speed Range	50 to 400 RPM
Speed Control Accuracy	± 1 RPM
Temperature Range	Ambient +7°C to 60°C
Temperature Uniformity	± 0.1°C at 37°C
Timer	0.1 to 99.9 hours
Orbit Size	0.75 in (1.9 cm)
Platform Size	18 x 18 in
Drive Mechanism	Heavy-duty unicentric counterbalanced drive
Dimensions (W x H x D)	22 x 24 x 30 in (56 x 61 x 76 cm)
Weight	133 lbs (60 kg)
Electrical Requirements	120V, 60Hz

New Brunswick Excella E24 Incubator Shaker Manual

Click Here to View the Technical Specs for the New Brunswick Excella E24

Request a Formal Quote

Inspection and Recertification Checklist

Examine the chamber glass for cracks or chips, replacing it as needed to maintain structural integrity.
Inspect door seals for signs of wear or damage, replacing them to ensure a tight seal.
Check the display for brightness and clarity, replacing any dim or dead pixels to maintain optimal visibility.
Test all buttons to confirm full functionality and consistent responsiveness.
Replace all platform assembly bearings to ensure smooth and reliable motion.
Inspect the drive belt for wear, replacing it if torn or cracked to maintain performance.
Examine all wiring for frays, tears, or breakages, addressing any issues for electrical safety.
Verify each PCB test point, replacing any malfunctioning components to ensure system reliability.
Check drive belt tension to confirm correct alignment and function.
Confirm the compressor’s operation, cleaning condenser filter and fins for efficient cooling.
Calibrate internal temperature accuracy using an NIST-traceable temperature probe.
Measure and calibrate platform RPMs with an NIST-traceable tachometer to ensure precision.
Conduct a final cosmetic inspection to verify all surfaces meet appearance standards.

Technician Inspection and Recertification Checklist

The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment

Task	Completed?	Remarks?
Examine chamber glass for cracks or chips, replace as needed	Completed
Inspect door seals for wear, replace to ensure tight seal	Completed
Check display brightness, replace dim or dead pixels	Completed
Test all buttons for full functionality and responsiveness	Completed
Replace platform assembly bearings for reliable motion	Completed
Inspect drive belt for wear, replace if torn or cracked	Completed
Examine wiring for frays or breakages, repair as needed	Completed
Verify PCB test points, replace faulty components	Completed
Check drive belt tension for proper alignment	Completed
Confirm compressor functionality, clean filter and fins	Completed
Calibrate internal temperature with NIST probe	Completed
Calibrate platform RPM with NIST-traceable tachometer	Completed
Conduct cosmetic inspection for appearance standards	Completed