Stock Notification!

The Labconco CentriVap Mobile System w/ Heat Boost you were interested in is currently unavailable, but we have found a great alternative at an excellent price!

Our Price: $7,495.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 3 to 5 Business Days

Request a Formal Quote

Quantity in Stock:1

Product Code: LCVMS

Qty:

Description

Recertification Protocol

Technical Specification Sheet

Labconco CentriVap Mobile System w/ Heat Boost, Cat # 7812013

The is Labconco Centrivap Mobile System combines a concentrator and cold trap into one compact unit. The concentrator uses centrifugal force, heat, and vacuum to rapidly evaporate solvents. The addition of centrifugation keeps solvents from foaming or bumping, while also concentrating solutes in the tube bottoms. The concentrator is equipped with a 300 watt heater to speed evaporation by warming the chamber during processing. The microprocessor, which controls the operation of the heater and the motor, provides excellent regulation and reproducibility of protocols. Save up to nine protocols for easy repeatability. As an integral part at the CentriVap Mobile System, the cold trap protects the vacuum pump by trapping moisture, vapors and corrosive fumes as they evaporate from the samples.

This unit is in excellent condition, and all of our equipment is fully tested to perform at factory specifications before being shipped.

INCLUDED:
The Labconco CentriVap Mobile System w/ Heat Boost includes:

> Fixed Angle Rotor
> Edwards RV3 Rotary Vane Vacuum Pump
> Power Cord
> Operator's Guide
> Full 180 Day Parts and Labor Warranty

Labconco CentriVap Mobile System w/ Heat Boost Specifications:

Max. Speed	1,725 RPM
Temperature Range	Up to 100C w/ Heat Boost
Time Range	1 to 999 minutes
Vacuum Level	0.002 mbar
Electrical Requirements	115V, 60Hz, 10.5A
Rotor Capacity	132 x 12-13mm Tubes
Cold Trap Temperature	-50C
Chamber Material	Epoxy-coated cast aluminum

Labconco CentriVap Mobile System w/ Heat Boost Manual

Request a Formal Quote

Centrifugal Evaporator Inspection and Recertification Checklist

Inspect the display panel, replacing any dim or dead pixels to ensure clear visual feedback
Verify full functionality of all buttons, confirming consistent responsiveness
Examine the acrylic or glass lid for any cracks or chips, ensuring safety and integrity
Check the vacuum chamber seal for any tears or cracks that could impact pressure retention
Test chamber lid functionality, confirming all micro switches report a consistent .04 Ohms
Verify external connections to the pump or cold trap, ensuring they are properly sealed and leak-free
Inspect and clean the internal fan and condenser (if applicable) for efficient cooling and airflow
Examine all internal wiring for frays or breakages, confirming secure and intact connections
Test motor functionality, replacing motor or bearings if performance is compromised
Inspect internal pump seals, replacing any worn or damaged seals to maintain vacuum integrity
Inspect all internal hoses for potential leaks, ensuring tight, clean seals
Confirm unit is capable of achieving all manufacturer-specified temperature ranges
Verify the unit can reach specified vacuum levels in accordance with manufacturer standards
Conduct a 6-8 hour cycle test to confirm consistent operational performance

Technician Inspection and Recertification Checklist: Centrifugal Evaporators

The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment

Task	Completed?	Remarks?
Inspect display panel for dim or dead pixels	Completed
Confirm functionality of all buttons	Completed
Check acrylic/glass lid for cracks or chips	Completed
Inspect vacuum chamber seal for tears or cracks	Completed
Confirm chamber lid micro switches report .04 Ohms	Completed
Verify pump or cold trap connections are sealed and leak-free	Completed
Inspect and clean internal fan and condenser (if applicable)	Completed
Inspect internal wiring for frays or breakages	Completed
Test motor functionality, replace motor/bearings if needed	Completed
Inspect internal pump seals, replace if needed	Completed
Inspect all internal hoses for leaks, ensure clean seals	Completed
Confirm unit achieves specified temperature ranges	Completed
Verify unit reaches specified vacuum levels	Completed
Conduct a 6-8 hour cycle test for operational performance	Completed