 |
 |
 |
|
Labconco 411001000 FlaskScrubber Glassware Washer, Undercounter
Maximum Fill Water Temperature
93°C / 199°F
Drain Pump
4.2 gal/min (16 L/min)
Drying Temperature Range
25 to 80°C / 77 to 176°F
- Constructed with durable Type 304 stainless steel including top, door, tank, and wash arms for long-term reliability
- Equipped with a lower spindle rack featuring 36 spindles, 18 glassware holders, adjustable clips, and plugs for versatile washing
- Includes a one-piece, tool-free, stainless steel fine mesh particle drain filter for easy maintenance
- Features a 5” touch screen with CleanWorks OS allowing control of wash parameters and up to 200 user-defined programs
- Electronic door latch with SpeedVent Technology enhances drying efficiency and reduces cycle times
- Quiet operation at or below 62 dB(A) for minimal disruption in the lab
- Compatible with liquid or powder detergents via a built-in level-sensing dispenser for precise usage
- Complies with CAN/CSA C22.2, ETL, and UL standards ensuring safety and reliability
- Undercounter design with adjustable leveling feet suitable for ADA-compliant height casework
The Labconco 411001000 FlaskScrubber Glassware Washer, Undercounter is an advanced solution designed for efficient and thorough cleaning of laboratory glassware. Built with durable Type 304 stainless steel, the washer ensures long-term reliability while providing excellent resistance to wear and corrosion. Its spacious interior features a lower spindle rack with 36 spindles, 18 glassware holders, and adjustable clips, making it ideal for a wide variety of narrow-neck and general-purpose labware. A built-in one-piece, tool-free fine mesh particle drain filter enhances ease of maintenance, while the undercounter design with adjustable leveling feet ensures compatibility with ADA-compliant height casework.
Equipped with the intuitive CleanWorks OS, this washer offers a full-color touchscreen interface with nine factory-set programs and the ability to create up to 200 user-defined programs. The system enables precise control over temperature, fill volume, and detergent dispensing, supported by clear alarm displays and password-protected settings. Additional features include a steam generator for stubborn contaminants, an electronic door latch with SpeedVent Technology for faster drying, and quiet operation at 62 dB(A), ensuring minimal disruption in the lab. With compliance to UL, CAN/CSA, and ETL standards, the FlaskScrubber Glassware Washer delivers exceptional performance and reliability for demanding laboratory environments.
All of our equipment is fully tested to perform at factory specifications before being shipped.
The Labconco 411001000 FlaskScrubber Glassware Washer, Undercounter includes:
- > Lower Spindle Rack w/ Glassware Holders
- > Small Spindle Accessory Kit
- > Leveling Feet x 4
- > Screws x 2
- > Hose Clamp
- > Drain Hose
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
- > Please Note: This glassware washer does NOT include a power cord and MUST BE HARD WIRED
Labconco 411001000 FlaskScrubber Glassware Washer, Undercounter Specifications
|
Minimum Fill Water Temperature
|
49°C (120°F)
|
|
Maximum Fill Water Temperature
|
93°C (199°F)
|
|
Pump Rating
|
96 gal/min (363 L/min) at 115V, 60 Hz
|
|
Drain Pump Rating
|
4.2 gal/min (16 L/min)
|
|
Pressure Range
|
20 to 120 PSI
|
|
Material
|
Type 304 Stainless Steel
|
|
Style
|
Undercounter
|
|
Drying System
|
Forced air drying, programmable up to 240 minutes, 25 to 80°C (77-to 76°F)
|
|
Control System
|
CleanWorks OS, touch screen interface, 9 factory-set programs, up to 200 user-defined programs
|
|
Conformance
|
CAN/CSA C22.2, ETL, UL
|
|
Detergent Compatibility
|
Liquid or Powder
|
|
Noise Level
|
62 dB(A)
|
|
Dimensions (W x D x H)
|
24.1 x 27.7 x 32.1 in. (61.2 x 70.4 x 81.5 cm)
|
|
Weight
|
202 lb. (106.1 kg)
|
|
Electrical Requirements
|
115V, 60Hz, 16A, 1Ph, requires dedicated 20A circuit
|
- Inspect the display for pixel clarity and brightness issues; replace any dim or defective pixels for optimal performance.
- Test each button for responsiveness, resistance, and continuity, replacing any that do not meet operational standards.
- Verify touchscreen functionality (if applicable), ensuring consistent response across all touch points.
- Check the door seal and lock for airtight closure and secure operation, replacing any compromised parts.
- Inspect rubber hoses for wear, tears, or cracks, replacing any that compromise system integrity.
- Inspect for internal or external leakage, addressing and sealing any detected points of vulnerability.
- Check all wiring for integrity, inspecting for frays, tears, or breakages, and replace compromised sections.
- Run the system in continuous cycle mode, monitoring for operational errors to ensure reliable performance.
- Confirm all sensors are activated and responsive using internal diagnostics, recalibrating or replacing any faulty ones.
- Conduct a cosmetic inspection of external surfaces, verifying cleanliness and addressing visible wear to meet standards.
Technician Inspection and Recertification Checklist
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment
| Task |
Completed? |
Remarks? |
| Inspect display for pixel issues and replace if needed | Completed | |
| Test button functionality and replace any defective buttons | Completed | |
| Verify touchscreen functionality (if applicable) | Completed | |
| Check door seal and lock functionality; replace if compromised | Completed | |
| Inspect rubber hoses for wear, tears, or cracks | Completed | |
| Check for internal or external leakage and address as needed | Completed | |
| Inspect wiring for frays, tears, or breakages | Completed | |
| Run continuous cycle mode and monitor for errors | Completed | |
| Confirm all sensors are activated and functional | Completed | |
| Conduct cosmetic inspection and address visible wear | Completed | |
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
