 |
 |
 |
|
IKA MS1 S1 Vortex Shaker
The IKA MS1 S1 Vortex Shaker is a high-quality laboratory vortexer designed for efficient and reliable mixing applications. Equipped with a speed-controlled motor, it offers infinite speed adjustment within a range of 200 to 2,500 RPM, ensuring precise control for various tasks. The electronic motor control maintains consistent speed even under varying load conditions, making it ideal for continuous operation. The shaker features two operation modes: touch mode, which activates shaking upon contact with the attachment, and continuous mode, which starts shaking immediately when powered on. Its compact design, with dimensions of 4.5 x 8.9 x 2.4 inches (11.5 x 22.5 x 6 cm) and a weight of 7.7 lbs (3.5 kg), makes it easy to integrate into any lab setup. With a 4.5 mm orbit and user-friendly controls, including a rocker switch and speed adjustment knob, the IKA MS1 S1 Vortex Shaker is a versatile and durable solution for laboratory mixing needs.
All of our equipment is fully tested to perform at factory specifications before being shipped.
The IKA MS1 S1 Vortex Shaker includes:
- > Power Cord
- > NIST Calibration and Preventative Maintenance Report
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
IKA MS1 S1 Vortex Shaker Specifications
|
Speed Range
|
200 to 2,500 RPM
|
|
Orbit
|
4.5 mm
|
|
Timer
|
N/A
|
|
Dimensions (W x D x H)
|
4.5 x 8.9 x 2.4 in. (11.5 x 22.5 x 6 cm)
|
|
Weight
|
7.7 lb. (3.5 kg)
|
|
Electrical Requirements
|
115V, 50/60Hz, 31W
|
- Verify power supply and PCB output correct, stable voltages across all required circuits
- Confirm the correct platform head is installed according to specifications
- Inspect the display for dim or dead pixels, replacing any compromised sections to maintain clear visibility
- Confirm full functionality of all buttons and knobs, ensuring accurate input response
- Verify that touch, pulse, and continuous modes operate fully and as intended
- Inspect all internal wiring for breakages, tears, or wear, replacing any underperforming components to ensure reliability
- Disassemble and thoroughly clean the internal casing to remove any accumulated debris
- Check that the feet are intact and confirm the vortexer is properly balanced on a flat surface
- Conduct a comprehensive cosmetic inspection to ensure all exterior surfaces meet quality standards
Technician Inspection and Recertification Checklist: Vortexer
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Verify power supply and PCB output stable, correct voltages across circuits
|
Completed
|
|
|
Confirm correct platform head is installed according to specifications
|
Completed
|
|
|
Inspect display for dim or dead pixels; replace compromised sections for clarity
|
Completed
|
|
|
Confirm functionality of all buttons and knobs for accurate input response
|
Completed
|
|
|
Verify full operation of touch, pulse, and continuous modes as intended
|
Completed
|
|
|
Inspect internal wiring for damage; replace underperforming components for reliability
|
Completed
|
|
|
Disassemble and clean internal casing to remove accumulated debris
|
Completed
|
|
|
Check feet for integrity and confirm vortexer is balanced on flat surface
|
Completed
|
|
|
Conduct comprehensive cosmetic inspection to ensure quality of exterior surfaces
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
