Home > Vortexers >

IKA MS 3 Vortexer

Our Price: $520.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 1 to 2 Business Days

Request a Formal Quote

Quantity in Stock:

Product Code: VWR-MS3

Qty:

Email me when Back-In-Stock

Description

Recertification Protocol

Technical Specification Sheet

IKA MS 3 Vortexer

Speed Range
200 to 3,000 RPM

Orbit
4.5 mm

Timer
1 sec. to 999 minutes

Features

Compact, universal vortexer designed for shaking tasks with small vessels and microtiter plates
Supports a wide range of attachments and features attachment detection for versatility
Offers both continuous and touch operation modes to suit different laboratory needs
Capable of handling a permissible shaking weight, including attachment, of up to 0.5 kg
Features orbital movement with a shaker diameter of 4.5 mm for effective mixing
Adjustable speed range from 200 to 2400 rpm with electronic motor control for consistent speed
Equipped with a scale for speed display, ensuring precise control
Suitable for working with microtiter plates, accommodating up to 1 plate at a time

The IKA MS 3 Vortexer is a compact, universal vortexer that is suitable for shaking tasks with all small vessels and microtiter plates. The MS 3 basic can support a wide range of attachments, features attachment detection, operates in either continuous or touch operation, and is stable in all speed ranges. Even if the surface material weight changes (increases), the electronic motor control holds the set speed constant.

All of our equipment is fully tested to perform at factory specifications before being shipped.

INCLUDED:
The IKA MS 3 Vortexer includes:

> Power Cord
> Operator's Manual
> Full 180 Day Parts and Labor Warranty

IKA MS 3 Vortexer Specifications

Type of movement	Orbital
Shaker diameter	4.5 mm
Permissible shaking weight (incl. attachment)	0.5 kg
Motor rating input	10 W
Motor rating output	8 W
Permissible ON time	100 %
Speed min (adjustable)	200 rpm
Speed range	0 - 2400 rpm
Speed display	Scale
Operating mode	Continuous operation
Touch function	Yes
Working with microtiter plates	Yes
Number of microtiter plates	1
Dimensions (W x H x D)	148 x 63 x 205 mm
Weight	2.9 kg
Permissible ambient temperature	5 - 40 C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 21
Voltage	100 - 240 V
Frequency	50/60 Hz
Power input	20 W
DC Voltage	24 V=
Current consumption	800 mA

Downloads

Technical Specification Download

Operator's Manual Download

Request a Formal Quote

Vortexer Inspection and Recertification Checklist

Verify power supply and PCB output correct, stable voltages across all required circuits
Confirm the correct platform head is installed according to specifications
Inspect the display for dim or dead pixels, replacing any compromised sections to maintain clear visibility
Confirm full functionality of all buttons and knobs, ensuring accurate input response
Verify that touch, pulse, and continuous modes operate fully and as intended
Inspect all internal wiring for breakages, tears, or wear, replacing any underperforming components to ensure reliability
Disassemble and thoroughly clean the internal casing to remove any accumulated debris
Check that the feet are intact and confirm the vortexer is properly balanced on a flat surface
Conduct a comprehensive cosmetic inspection to ensure all exterior surfaces meet quality standards

Technician Inspection and Recertification Checklist: Vortexer

The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment

Task	Completed?	Remarks?
Verify power supply and PCB output stable, correct voltages across circuits	Completed
Confirm correct platform head is installed according to specifications	Completed
Inspect display for dim or dead pixels; replace compromised sections for clarity	Completed
Confirm functionality of all buttons and knobs for accurate input response	Completed
Verify full operation of touch, pulse, and continuous modes as intended	Completed
Inspect internal wiring for damage; replace underperforming components for reliability	Completed
Disassemble and clean internal casing to remove accumulated debris	Completed
Check feet for integrity and confirm vortexer is balanced on flat surface	Completed
Conduct comprehensive cosmetic inspection to ensure quality of exterior surfaces	Completed