Home > Vortexers >

Fisher Scientific MS1S7 Vortexer

Our Price: $245.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 1 to 3 Business Days

Quantity in Stock:2

Product Code: FS-VM

Qty:

Description

Recertification Protocol

Fisher Scientific MS1S7 Vortexer

The Fisher Scientific MS1 S7 Vortexer offers a speed range of 200 to 2500 rpm adjustable via dial control and has a maximum shaking weight of 0.5kg. This vortex shaker operates in full continuous mode or through activation from intermittent contact. All of our equipment is fully tested to perform at factory specifications before being shipped.

INCLUDED:
The Fisher Scientific MS1S7 Vortexer includes:

> Power Cord
> Full 180 Day Parts and Labor Warranty

Fisher Scientific MS1S7 Vortexer

Speed Range	200-2500 RPM
Electrial Requirements	115 V, 50/60Hz, 31 W
Maximum Shaking Weight	0.5kg
Orbital Diameter	0.1875

Vortexer Inspection and Recertification Checklist

Verify power supply and PCB output correct, stable voltages across all required circuits
Confirm the correct platform head is installed according to specifications
Inspect the display for dim or dead pixels, replacing any compromised sections to maintain clear visibility
Confirm full functionality of all buttons and knobs, ensuring accurate input response
Verify that touch, pulse, and continuous modes operate fully and as intended
Inspect all internal wiring for breakages, tears, or wear, replacing any underperforming components to ensure reliability
Disassemble and thoroughly clean the internal casing to remove any accumulated debris
Check that the feet are intact and confirm the vortexer is properly balanced on a flat surface
Conduct a comprehensive cosmetic inspection to ensure all exterior surfaces meet quality standards

Technician Inspection and Recertification Checklist: Vortexer

The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment

Task	Completed?	Remarks?
Verify power supply and PCB output stable, correct voltages across circuits	Completed
Confirm correct platform head is installed according to specifications	Completed
Inspect display for dim or dead pixels; replace compromised sections for clarity	Completed
Confirm functionality of all buttons and knobs for accurate input response	Completed
Verify full operation of touch, pulse, and continuous modes as intended	Completed
Inspect internal wiring for damage; replace underperforming components for reliability	Completed
Disassemble and clean internal casing to remove accumulated debris	Completed
Check feet for integrity and confirm vortexer is balanced on flat surface	Completed
Conduct comprehensive cosmetic inspection to ensure quality of exterior surfaces	Completed