 |
 |
 |
|
Fisher Scientific Isotemp Microbiological Gravity Convection Incubator, Cat. #: 151030514
Temperature Range
Ambient +5°C to 75°C
Temperature Uniformity
± 0.6°C at 37°C
- Microprocessor controller for precise temperature adjustments and monitoring
- Automatic over-temperature alarm to maintain safe sample conditions
- Low air exchange rate minimizes sample drying, ideal for long-term experiments
- Corrosion-resistant stainless-steel interior with smooth, rounded edges for easy cleaning and reduced contamination risk
- Adjustable, tool-free shelving system to optimize chamber space for different setups
- Stackable design for efficient use of lab space without additional tools or kits
- Access port with silicone plug for independent data logging or small equipment usage
- Low air exchange rate to minimize sample drying, ideal for long-term experiments
The Fisher Scientific Isotemp Microbiological Gravity Convection Incubator, Cat. #: 151030514 is a highly efficient and reliable solution for various laboratory needs, especially in microbiological research. This incubator boasts a wide temperature range of Ambient +5°C to 75°C, ensuring excellent temperature uniformity (± 0.6°C at 37°C) and stability (± 0.2°C at 37°C). With a generous internal volume of 4 cubic feet (117L), it provides ample space for various sample types, while maintaining a usable space of 100L with racks and shelves. Key to its functionality is the intuitive microprocessor controller, enabling easy temperature adjustments and monitoring. The incubator features an automatic over-temperature alarm, ensuring samples are always kept within the desired conditions without the need for operator settings. Its low air exchange rate minimizes sample drying, making it ideal for long-term experiments.
Designed with user convenience in mind, the incubator includes an on/off timer and a corrosion-resistant stainless-steel interior with smooth, rounded edges to facilitate easy cleaning and reduce contamination risks. The shelving system is flexible and can be adjusted or removed without tools, optimizing chamber space for different experimental setups. The exterior is also constructed of stainless steel, providing a professional appearance and resistance to fingerprint smudges. The incubator is stackable with other same-size units without requiring additional tools or kits. An access port with a silicone plug allows for independent data logging or the use of small equipment within the unit. Moreover, the large, easy-to-view fluorescent display and internal glass door offer convenient sample monitoring without disturbing the internal environment.
All of our equipment is fully tested to perform at factory
specifications before being shipped.
The Fisher Scientific Isotemp Microbiological Gravity Convection Incubator, Cat. #: 151030514 includes:
- > 2 Shelves
- > Calibration and Preventative Maintenance Report
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Fisher Scientific Isotemp Microbiological Gravity Convection Incubator, Cat. #: 151030514 Specifications
|
Temperature Range
|
Ambient +5°C to 75°C
|
|
Temperature Uniformity
|
± 0.6°C at 37°C
|
|
Temperature Stability
|
± 0.2°C at 37°C
|
|
Volume
|
4 cu. ft. (117L)
|
|
Shelf Load
|
25 lb. (55 kg)
|
|
Shelf Dimensions (W x D)
|
17.28 x 14.8 in. (43.9 x 37.6 cm)
|
|
Internal Dimensions (D x W x H)
|
16.3 x 18.3 x 23.9 in. (41.4 x 46.4 x 60.8 cm)
|
|
External Dimensions (D x W x H)
|
22.2 x 25.2 x 32.3 in. (56.5 x 64 x 82 cm)
|
|
Weight
|
112 lb. (51 kg)
|
|
Electrical Requirements
|
120V, 60Hz, 540W, 4.5A
|
- Inspect the display for any dim, flickering, or dead pixels, replacing any affected areas to maintain full readability and operational clarity
- Thoroughly examine external regulators for any signs of damage, wear, or malfunction (if applicable), replacing any compromised parts
- Inspect temperature, CO₂, and H₂O sensors (if applicable), ensuring each sensor is functioning correctly and accurately reporting conditions
- Conduct a detailed inspection of all internal wiring for frays, tears, or breakages; replace any compromised wires to ensure safe and reliable connections
- Verify that software settings align with the internal components and calibration specifications, adjusting configurations as needed for accurate operation
- Inspect and clean the fan, ensuring it is free from dust or obstructions; replace if performance is below required standards
- Examine wheels and leveling mounts for structural integrity, ensuring proper balance and stability for safe operation
- Inspect door gaskets and latches for any signs of wear or damage, replacing if necessary to maintain a secure seal and optimal environmental control
- Calibrate temperature accuracy at 37°C using a NIST-traceable probe, confirming it meets required tolerances
- Calibrate CO₂ level to 5% using a Fyrite combustion test kit (if applicable), ensuring precise atmospheric conditions
- Monitor temperature and CO₂ stability over a 24-hour period, verifying consistent operation within specified ranges
- Conduct a thorough cosmetic inspection to confirm all external surfaces and components meet quality standards, free from visible damage or wear
Technician Inspection and Recertification Checklist: Incubator
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Inspect display for dim, flickering, or dead pixels; replace for readability
|
Completed
|
|
|
Examine external regulators for damage or malfunction; replace compromised parts
|
Completed
|
|
|
Inspect temperature, CO₂, and H₂O sensors for correct function and accuracy
|
Completed
|
|
|
Inspect internal wiring for frays, tears, or breakages; replace compromised wires
|
Completed
|
|
|
Verify software settings align with components and calibration specs; adjust if needed
|
Completed
|
|
|
Clean fan and remove dust/obstructions; replace if performance is substandard
|
Completed
|
|
|
Examine wheels and leveling mounts for structural integrity and balance
|
Completed
|
|
|
Inspect door gaskets and latches for wear or damage; replace to maintain seal
|
Completed
|
|
|
Calibrate temperature at 37°C with NIST-traceable probe to confirm accuracy
|
Completed
|
|
|
Calibrate CO₂ level to 5% with Fyrite test kit for atmospheric precision
|
Completed
|
|
|
Monitor temperature and CO₂ stability over 24-hour period to verify consistency
|
Completed
|
|
|
Conduct cosmetic inspection to confirm quality of external surfaces and components
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
