|
|
|
|
Fisher Scientific Isotemp 650D Incubator Oven
Temperature Range 30°C to 75°C
Temperature Uniformity ± 0.7°C
Volume 5 cu. ft. (141.6L)
- Ideal for routine laboratory procedures, drying slides, paraffin embedding, tissue culture, and more
- Equipped with an internal GFI outlet (120v) for adding shakers or hotplate stirrers
- Offers a wide temperature range from 30°C to 75°C (86°F to 167°F)
- Easy-to-use keypad control with arrow keys for precise temperature adjustments in 0.1°C increments
- Features over-temperature protection, automatically set at 3°C above the setpoint
- PID controller with fixed parameters for hassle-free operation, requiring no tuning
- Low maintenance design with durable enamel-coated steel cabinet and stainless steel chamber
- Spacious 5 cubic feet volume with chamber dimensions of 18 x 18 x 26.5 inches (46 x 46 x 67 cm)
The Fisher Scientific Isotemp 650D Incubator Oven
with
gravity flow circulation provides accurate heating for routine
laboratory procedures, drying and staining of slides, paraffin
embedding, tissue culture work, incubation of antibody tests,
microbiological determinations, crystallization studies and more. This incubator is equipped with an internal GFI outlet (120v) to add a
shaker, hotplate stirrer, etc. The Fisher 650D has a temperature range
of 30°C to 75°C (86°F to 167°F) and easy-to-use
keypad control with arrow keys to increase or decrease setpoint
temperature in 0.1°C increments. Over temperature value is automatically
set at 3°C above setpoint. PID controller comes with fixed parameters so
no tuning is required. The Isotemp 650D is a low maintenance incubator, featuring a durable enamel-coated steel cabinet, stainless steel chamber, and low-watt-density heater elements.
All of our equipment will be fully tested to perform at factory specifications before being shipped.
The Fisher Scientific Isotemp 650D Incubator Oven includes:
- > 2 Shelves
- > Operator's Manual
- > Power Cord
- > Full 180 Day Parts and Labor Warranty
Fisher Scientific Isotemp 650D Incubator Specifications
Temperature Range
|
30°C to 75°C
|
Temperature Uniformity
|
±0.7°C
|
Temperature Resolution
|
0.1°C
|
Recovery Time
|
2 minutes
|
Air Changes Per Hour
|
3
|
Volume
|
5 cubic feet
|
Chamber Dimensions (D x W x H)
|
18 x 18 x 26.5 in (46 x 46 x 67 cm)
|
Overall Dimensions (L x W x H)
|
23.5 x 26 x 39 in (60 x 66 x 99 cm)
|
Fisher Scientific Isotemp 650D ManualClick Here to View the Technical Specs for the Fisher Scientific Isotemp 650D
- Verify power supply and PCB outputs are within specified voltage ranges
- Inspect display for any dim or dead pixels, replacing as needed to ensure visibility
- Confirm full functionality and responsiveness of all control buttons
- Examine all internal wiring for frays, cuts, or damage, ensuring secure and reliable connections
- Inspect door seals and gaskets for integrity, replacing any compromised components
- Evaluate door handle and locking mechanism for wear or issues, replacing if performance is impaired
- Inspect and clean internal fan; replace if performance does not meet requirements
- Calibrate set temperature using a NIST-traceable probe for precise accuracy
- Confirm functionality of over-temperature alarm and indicator light
- Verify internal outlet functionality, if applicable, to ensure it meets operational standards
- Inspect internal lighting for full functionality and brightness, if applicable
- Perform a cosmetic inspection to confirm the oven’s exterior and interior meet quality standards
Technician Inspection and Recertification Checklist: Ovens
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
Task
|
Completed?
|
Remarks?
|
Verify power supply and PCB outputs are within specified voltage ranges
|
Completed
|
|
Inspect display for dim or dead pixels; replace if needed
|
Completed
|
|
Confirm full functionality of all control buttons
|
Completed
|
|
Examine internal wiring for damage; ensure secure connections
|
Completed
|
|
Inspect door seals and gaskets, replacing any compromised components
|
Completed
|
|
Evaluate door handle and locking mechanism, replacing if worn
|
Completed
|
|
Inspect and clean internal fan; replace if performance is insufficient
|
Completed
|
|
Calibrate set temperature using a NIST-traceable probe
|
Completed
|
|
Confirm over-temperature alarm and indicator light functionality
|
Completed
|
|
Verify internal outlet functionality, if applicable
|
Completed
|
|
Inspect internal lighting for full functionality and brightness
|
Completed
|
|
Perform cosmetic inspection to confirm quality standards of exterior and interior
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
|
|
|
|