 |
Fisher Scientific Isotemp 205 Digital Water Bath
Temperature Range
Ambient to 100°C
Temperature Uniformity
±0.24°C at 37°C
- Microprocessor control ensures accurate temperatures for consistent results in experiments, with stability of ±0.5°C at 37°C.
- Wide temperature range to ensure viability for a variety of laboratory applications.
- Dual thermostats prevent overheating while the microprocessor control guarantees reliable operation.
- Comes with a removable cover that reduces evaporation and maintains uniform temperature, supporting eco-friendly lab practices.
- Features a digital control/readout for easy monitoring and adjusting of settings.
- Cool to touch rim ensures safety during high temperature processes.
The Fisher Scientific Isotemp 205 Digital Water Bath is a microprocessor controlled water bath with a digital control/readout, volume of 5 L, temperature up to 100°C, temperature uniformity ±0.24°C at 37°C, stability ±0.5°C at 37°C, 115 V.
All of our equipment is fully tested to perform at factory specifications before being shipped.
The Fisher Scientific Isotemp 205 Digital Water Bath includes:
- > Lid
- > Power Cord
- > Operator's Guide
- > Full 180 Day Parts and Labor Warranty
Fisher Scientific Isotemp 205 Digital Water Bath Specifications
|
Temperature Range
|
Ambient to 100°C
|
|
Temperature Uniformity
|
±0.24°C at 37°C
|
|
Control
|
Digital
|
|
Capacity
|
5L (1.3 gal)
|
|
Bath Dimensions (L x W x H)
|
5.88 x 11.75 x 6 in (14.9 x 29.8 x 15.2
cm)
|
|
Electrical Requirements
|
120V, 60Hz, 2.5A
|
|
Temperature Stability
|
±0.5°C at 37°C
|
|
Overall Dimensions (L x W x H)
|
10.5 x 14.12 x 6.25 in (26.67 x 35.9 x 15.9 cm)
|
Fisher Isotemp 205 Manual
 Click Here to View all the Technical Specs for the Isotemp 205
Fisher Scientific Isotemp 205
- Confirm power supply and PCB are outputting stable, correct voltages across all essential circuits to ensure reliable operation
- Inspect the display for any dim, flickering, or dead pixels, replacing any compromised sections to maintain full clarity and accurate readouts
- Verify that all buttons, knobs, and switches are functioning properly, providing precise and responsive control across all settings
- Conduct a thorough inspection of the water reservoir for any holes, rust, or other structural damage that may impact its integrity
- Fill the reservoir with water, checking closely for any external or internal leaks that could affect performance
- Examine the lid for any signs of wear or damage, replacing hinges and handles if necessary to ensure a secure and proper seal
- Inspect for any internal leaks originating from the water reservoir, confirming the unit’s internal plumbing integrity
- Conduct a comprehensive inspection of internal wiring for any breakages, tears, or wear; replace any underperforming or damaged components to maintain safe operation
- Examine internal insulation for signs of burns, breaks, or deterioration, replacing as needed to ensure thermal efficiency and safety
- Confirm that all feet are intact and that the bath sits level and balanced on a flat surface to prevent movement or instability
- Calibrate both temperature accuracy and uniformity using a NIST-traceable temperature probe, verifying compliance with specification standards
- Perform a detailed cosmetic inspection to confirm that all external surfaces and finishes meet aesthetic and quality standards
Technician Inspection and Recertification Checklist: Water Bath
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Confirm power supply and PCB output stable, correct voltages across circuits
|
Completed
|
|
|
Inspect display for dim, flickering, or dead pixels; replace for clarity
|
Completed
|
|
|
Verify functionality of all buttons, knobs, and switches for responsive control
|
Completed
|
|
|
Inspect water reservoir for holes, rust, or structural damage
|
Completed
|
|
|
Fill reservoir with water; check for external or internal leaks
|
Completed
|
|
|
Examine lid for wear or damage; replace hinges or handles as needed
|
Completed
|
|
|
Inspect for internal leaks from water reservoir to confirm plumbing integrity
|
Completed
|
|
|
Check internal wiring for damage; replace underperforming components for safety
|
Completed
|
|
|
Examine internal insulation for burns, breaks, or deterioration; replace as needed
|
Completed
|
|
|
Confirm feet are intact and bath is balanced on flat surface
|
Completed
|
|
|
Calibrate temperature accuracy and uniformity with NIST-traceable probe
|
Completed
|
|
|
Perform cosmetic inspection to confirm quality of external surfaces and finishes
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
Wonderful product, great price 
