|
|
|
|
Fisher Scientific Advanced Heavy Duty Vortex Mixer, Cat. #: 02216109
The Fisher Scientific Advanced Heavy Duty Vortex Mixer, Cat. #: 02216109 is designed for rigorous and continuous use, featuring a robust design and an efficient motor. This mixer operates effectively across its entire speed range, even with all accessories attached, making it ideal for applications requiring consistent, repeatable results. It boasts user-friendly touchpad controls and LED displays for precise control and monitoring. The microprocessor control includes a 3-way power switch and LED display, with up/down keys for accurate set-point control. Its timer can display elapsed time or be programmed to a user-defined limit, automatically shutting off the unit when time reaches zero. The mixer offers two modes of operation: a Touch mode, activating mixing when the cup head is depressed, and a Continuous mode for use with accessory attachments. Its speed range varies from 300 to 2,500 RPM, increasing to 300 to 3,500 RPM in touch mode, and features a 4.9mm orbit. The timer is highly versatile, ranging from 1 second to 9999 minutes, ensuring flexibility for various mixing needs.
The Fisher Scientific Advanced Heavy Duty Vortex Mixer, Cat. #: 02216109 includes:
- > Cup Head
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Fisher Scientific Advanced Heavy Duty Vortex Mixer, Cat. #: 02216109 Specifications
Speed Range
|
300 to 2,500 RPM (300 to 3,500 RPM on touch mode)
|
Orbit
|
4.9mm (0.194 in.)
|
Timer
|
1 second to 9999 minutes
|
Dimensions (L x W x H)
|
9.5 x 6.6 x 6.5 in. (24.1 x 16.8 x 16.5 cm)
|
Weight
|
2.4 lb. (1.1 kg)
|
Electrical Requirements
|
120V, 50/60Hz, 0.25A
|
- Verify power supply and PCB output correct, stable voltages across all required circuits
- Confirm the correct platform head is installed according to specifications
- Inspect the display for dim or dead pixels, replacing any compromised sections to maintain clear visibility
- Confirm full functionality of all buttons and knobs, ensuring accurate input response
- Verify that touch, pulse, and continuous modes operate fully and as intended
- Inspect all internal wiring for breakages, tears, or wear, replacing any underperforming components to ensure reliability
- Disassemble and thoroughly clean the internal casing to remove any accumulated debris
- Check that the feet are intact and confirm the vortexer is properly balanced on a flat surface
- Conduct a comprehensive cosmetic inspection to ensure all exterior surfaces meet quality standards
Technician Inspection and Recertification Checklist: Vortexer
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
Task
|
Completed?
|
Remarks?
|
Verify power supply and PCB output stable, correct voltages across circuits
|
Completed
|
|
Confirm correct platform head is installed according to specifications
|
Completed
|
|
Inspect display for dim or dead pixels; replace compromised sections for clarity
|
Completed
|
|
Confirm functionality of all buttons and knobs for accurate input response
|
Completed
|
|
Verify full operation of touch, pulse, and continuous modes as intended
|
Completed
|
|
Inspect internal wiring for damage; replace underperforming components for reliability
|
Completed
|
|
Disassemble and clean internal casing to remove accumulated debris
|
Completed
|
|
Check feet for integrity and confirm vortexer is balanced on flat surface
|
Completed
|
|
Conduct comprehensive cosmetic inspection to ensure quality of exterior surfaces
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
|
|
|
|