 |
 |
 |
|
Eppendorf 5910R Refrigerated Centrifuge
Min / Max RPM
100 / 14,000
Temperature Range
-11 °C to 40 °C
- High capacity of up to 4 × 1000 mL, with a wide variety of rotors.
- Suitable for micro test tubes, microtainers, spin columns, cryogenic tubes, conical tubes, bottles, microplates, PCR plates, deepwell plates, slides (with CombiSlide adapter), and blood collection systems.
- Features automatic rotor detection with speed limit, automatic imbalance detection, and a clear digital display.
- 99 program slots for user-defined settings, plus 10 acceleration and braking ramps.
- Option to manually set the radius for maximum rcf accuracy.
- FastTemp Function quickly brings rotor chamber, rotor, buckets, and adapters to target temperature without samples.
- Continuous Cooling maintains temperature in the rotor chamber with the lid closed when the centrifuge is not in use.
The Eppendorf 5910R Refrigerated
Centrifuge combines high capacity and performance in a compact and versatile product design. This versatile centrifuge has a maximum speed of up 14,000 rotations per minute and a maximum g-force of 22,132 x g, making it the perfect benchtop centrifuge for just about any application. Other new features include: FastTemp pro function which allows for automatic precooling based on pre-programmable time and date, ECO shutoff function reduces power consumption considerably engaging after 8 hours, continuous cooling maintains a constant temperature after the run has been completed, and maximum capacity of 4 x 1000ml (4 x 5 mtp).
We may have different adapters available depending on the rotor chosen with this centrifuge. If the selected rotor includes adapters that will not work for your application, please inquire.All of our equipment is fully tested to perform at factory
specifications before being shipped.
Please confirm the selected rotor meets your application needs and request a different rotor, if necessary. Available rotors can be found in our Rotor Compatibility Guide.
The Eppendorf 5910R Refrigerated Centrifuge includes:
- > Rotor Selected Above
- > NIST Centrifuge Calibration and Preventative Maintenance Report
- > Operator's Manual
- > Power Cord
- > Full 180 Day Parts and Labor Warranty
Eppendorf 5910R Refrigerated Centrifuge Specifications
|
Max. RCF
|
22,132 ×
g
|
|
Max. speed
|
14,000 rpm
|
|
Max. capacity
|
4 × 1,000 mL/
4 × 5 MTP
|
|
Rotors
available
|
10
|
|
Acceleration/braking
ramps
|
10/10
|
|
Number of
programs
|
99 (5 program
keys)
|
|
Display
|
large,
brightly lit LCD
|
|
Timer
|
10 s to
99 h 59 min, with continuous run function, short-spin
|
|
Power supply
|
120 V,
50 – 60 Hz
|
|
Max. power
consumption
|
1,650 W
|
|
Dimensions
(W × D × H)
|
72 × 66 ×
37 cm / 28.3 × 25.9 × 14.5 in
|
|
Footprint
(dimensions w/o front panel, W x D)
|
72 × 62 cm
|
|
Height (with
open lid)
|
85 cm / 33.5
in
|
|
Weight w/o
accessories
|
109 kg / 240
lb
|
|
Cooling
|
refrigerated
|
|
Temperature
control range
|
-11 °C
to 40 °C
|
|
Noise Level
w/Rotor S-4xUniversal
|
<53 dB(A)
|
|
Max. capacity
|
64 × 15 mL/
36 × 50 mL conical tubes
120 × 13 mm/
104 × 16 mm blood tubes
20 × MTP/
4 × DWP plates
|
Click Here to Expand Rotor Specifications
|
S-4xUniversal Rotor Specs
|
|
Capacity
|
4 x 750ml
|
|
Max RPM
|
4,250
|
|
Max RCF
|
4,402 x g
|
|
S-4-1000 Rotor Specs
|
|
Capacity
|
4 × 1000ml
|
|
Max RPM
|
3,700
|
|
Max RCF
|
3,428 x g
|
- Door Latch Assembly Checked for Full Function
- Door Hinges are Checked and Lubed as Needed
- Drive Belt is Checked for Rips and Tears and Replaced if Needed
- Rotors and O-rings are Lubed as Needed
- Lamps and Display are Checked and Replaced if Dim
- Line Cord is Checked Signs of Fray or Damage and Replaced Accordingly
- Internal Circuitry is Checked for Faulty/Shorted Components and Replaced Accordingly
- Confirm the power supply output voltages match specified requirements for stable distribution to all internal components
- Measure and verify voltages at PCB test points to ensure accurate power delivery and circuit integrity
- Confirm rotor compatibility with the centrifuge model and check that rotor detection systems recognize the rotor type
- Inspect the exterior for any cosmetic or structural damage that could affect performance or safety
- Check the door mechanism alignment to ensure secure and smooth opening and closing
- Inspect and replace the gas strut with an OEM part to maintain proper door support and safety
- Examine the rotor chamber bowl for dents or damage and replace as needed to ensure safe operation
- Replace and confirm full functionality of all lid lock switches to maintain secure closure
- Inspect and lubricate the door lock mechanism, applying grease to the lid lock rail for smooth operation
- Test compressor functionality (if applicable) to ensure proper operation and consistent temperature control
- Conduct an 8-12 hour cycle test to validate consistent performance over prolonged use
- Confirm rotor motor stability, check for unusual noise, and assess mechanical integrity during operation
- Inspect the condensation drain and clear any clogs to prevent moisture buildup in the rotor chamber
- Verify RPM accuracy using an NIST-traceable tachometer and perform calibration as necessary
- Check the centrifuge error log to ensure zero recorded issues, confirming system reliability
Technician Inspection and Recertification Checklist: Centrifuges
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
| Task |
Completed? |
Remarks? |
| Confirm power supply output voltages match specified requirements |
Completed |
|
| Measure and verify voltages at PCB test points for accuracy |
Completed |
|
| Confirm rotor compatibility and detection for proper identification |
Completed |
|
| Inspect exterior for cosmetic or structural damage |
Completed |
|
| Check door mechanism alignment for secure opening and closing |
Completed |
|
| Inspect and replace gas strut with OEM part as needed |
Completed |
|
| Examine rotor chamber for dents or damage and replace if necessary |
Completed |
|
| Replace and confirm functionality of all lid lock switches |
Completed |
|
| Lubricate door lock mechanism and lid lock rail for smooth operation |
Completed |
|
| Test compressor (if applicable) for proper operation and cooling |
Completed |
|
| Run 8-12 hour cycle test to ensure consistent performance |
Completed |
|
| Check rotor motor for stability, noise, and integrity |
Completed |
|
| Inspect and clear condensation drain to prevent buildup |
Completed |
|
| Verify RPM accuracy with NIST traceable tachometer and calibrate |
Completed |
|
| Check centrifuge error log for zero recorded issues |
Completed |
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
