Home > Centrifuges >

Eppendorf 5810 Centrifuge

Net 30 Terms and Financing Available

Our Price: $5,195.00

Price with Selected Options: $5,195.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 3 to 5 Business Days
Included Documentation: NIST Centrifuge Calibration and Preventative Maintenance Report

Request a Formal Quote

Quantity in Stock:

Product Code: EP-5810

		Please Select an Option Below
Select Included Option*:

Qty:	Email me when Back-In-Stock

Description

Recertification Protocol

Technical Specification Sheet

Eppendorf 5810 Centrifuge

Maximum Speed
14,000 RPM

Maximum RCF
20,800 x g

Maximum Capacity
4 x 750 mL

Features

Features a brushless, maintenance-free motor, ensuring long-lasting, reliable performance
Internal capacity accommodates up to four 400 ml tubes or 16 microplates, offering versatility
Compatible with a variety of rotors (see options above)
Functions as three centrifuges in one: high-capacity, high-speed, and microcentrifuge
Offers a wide range of applications, from cell harvesting to DNA precipitation
Capable of reaching speeds up to 14,000 RPM with a maximum RCF of 20,800 x g
Includes a timer with settings from 1 to 99 minutes, plus a continuous mode
Compact dimensions (21 x 21 x 13 inches) with a weight of 150 lb, fitting easily in laboratory spaces

The Eppendorf 5810 Centrifuge features a brushless maintenance-free motor and an internal capacity of up to four 400 ml tubes or 16 microplates. This centrifuge accommodates a variety of rotors to meet your application needs including the F-45-30-11 Rotor, the A-4-81 Rotor, and the A-4-62 Swing bucket rotor. The 5810 is three centrifuges in one: a high-capacity, general-purpose centrifuge for cell harvesting; a high-speed centrifuge for separating cell lysates; and a microcentrifuge for DNA precipitations. The 5810 offers maximum application versatility and popular tube capacity. The 5810 offers speeds up to 14,000 RPM with a maximum RCF of 20,800 x g with a fixed angle rotor. We may have different adapters available depending on the rotor chosen with this centrifuge. If the selected rotor includes adapters that will not work for your application, please inquire.

All of our equipment is fully tested to perform at factory specifications before being shipped.

Please confirm the selected rotor meets your application needs and request a different rotor, if necessary. Available rotors can be found in our Rotor Compatibility Guide.

INCLUDED:
The Eppendorf 5810 Centrifuge includes:

> Rotor Selected Above
> NIST Centrifuge Calibration and Preventative Maintenance Report
> Operator's Guide
> Power Cord
> Full 180 Day Parts and Labor Warranty

Eppendorf 5810 Centrifuge Specifications

Max RCF	20,800 x g
Speed range	14,000 rpm (Fixed Angle Rotor)
Timer	1 to 99 min, with cont. mode
Dimensions (W x D x H)	21 x 21 x 13 in
Weight	150 lb
Refrigeration	No Refrigeration

Click Here to Expand Rotor Specifications

A-4-62 Rotor Specs
Capacity	4 round buckets up to 250ml per
Max RPM	4,000
Max RCF	3,220 x g

A-2-DWP-AT Rotor Specs
Capacity	2 × 6 MTP
Max RPM	4,500
Max RCF	3,486 x g

A-4-81 Rotor Specs
Capacity	4 × 500 ml
Max RPM	4,000
Max RCF	3,220 x g

F-34-6-38 Rotor Specs
Capacity	6 × 85 mL tubes
Max RPM	12,000
Max RCF	18,514 x g

F-45-30-11 Rotor Specs
Capacity	30 × 1.5/2.0 mL tubes
Max RPM	14,000
Max RCF	20,817 x g

FA-45-48-11 Rotor Specs
Capacity	48 × 5 mL tubes
Max RPM	13,100
Max RCF	20,913 x g

S-4-104 Rotor Specs
Capacity	4 × 750 mL
Max RPM	3,900
Max RCF	3,214 x g

Preventative Maintenance Performed on The Eppendorf 5810 Centrifuge

Door Latch Assembly Checked for Full Function
Door Hinges are Checked and Lubed as Needed
Drive Belt is Checked for Rips and Tears and Replaced if Needed
Rotors and O-rings are Lubed as Needed
Lamps and Display are Checked and Replaced if Dim
Line Cord is Checked for Signs of Fray or Damage and Replaced Accordingly
Internal Circuitry is Checked for Faulty/Shorted Components and Replaced Accordingly

Downloads

Technical Specification Download

Operator's Manual Download

Request a Formal Quote

Centrifuge Inspection and Recertification Checklist

Confirm the power supply output voltages match specified requirements for stable distribution to all internal components
Measure and verify voltages at PCB test points to ensure accurate power delivery and circuit integrity
Confirm rotor compatibility with the centrifuge model and check that rotor detection systems recognize the rotor type
Inspect the exterior for any cosmetic or structural damage that could affect performance or safety
Check the door mechanism alignment to ensure secure and smooth opening and closing
Inspect and replace the gas strut with an OEM part to maintain proper door support and safety
Examine the rotor chamber bowl for dents or damage and replace as needed to ensure safe operation
Replace and confirm full functionality of all lid lock switches to maintain secure closure
Inspect and lubricate the door lock mechanism, applying grease to the lid lock rail for smooth operation
Test compressor functionality (if applicable) to ensure proper operation and consistent temperature control
Conduct an 8-12 hour cycle test to validate consistent performance over prolonged use
Confirm rotor motor stability, check for unusual noise, and assess mechanical integrity during operation
Inspect the condensation drain and clear any clogs to prevent moisture buildup in the rotor chamber
Verify RPM accuracy using an NIST-traceable tachometer and perform calibration as necessary
Check the centrifuge error log to ensure zero recorded issues, confirming system reliability

Technician Inspection and Recertification Checklist: Centrifuges

The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment

Task	Completed?	Remarks?
Confirm power supply output voltages match specified requirements	Completed
Measure and verify voltages at PCB test points for accuracy	Completed
Confirm rotor compatibility and detection for proper identification	Completed
Inspect exterior for cosmetic or structural damage	Completed
Check door mechanism alignment for secure opening and closing	Completed
Inspect and replace gas strut with OEM part as needed	Completed
Examine rotor chamber for dents or damage and replace if necessary	Completed
Replace and confirm functionality of all lid lock switches	Completed
Lubricate door lock mechanism and lid lock rail for smooth operation	Completed
Test compressor (if applicable) for proper operation and cooling	Completed
Run 8-12 hour cycle test to ensure consistent performance	Completed
Check rotor motor for stability, noise, and integrity	Completed
Inspect and clear condensation drain to prevent buildup	Completed
Verify RPM accuracy with NIST traceable tachometer and calibrate	Completed
Check centrifuge error log for zero recorded issues	Completed