Home > Centrifuges >

Eppendorf 5424 Centrifuge

Our Price: $2,645.00

Sale Price: $2,175.00

Money Saved: $470.00

Condition: Fully Recertified and Tested to Perform at Manufacturer Specifications
Warranty: 180-Day Full Parts and Labor (Click for Info)
Typically Ships Within: 1 to 3 Business Days
Included Documentation: NIST Centrifuge Calibration and Preventative Maintenance Report

Request a Formal Quote

Quantity in Stock:3

Product Code: EPP-5424

Qty:

Description

Recertification Protocol

Technical Specification Sheet

Eppendorf 5424 Centrifuge w/ FA-45-24-11 Rotor & Aerosol Lid

Maximum RCF
21,130 x g

Maximum RPM

15,000 rpm

Maximum Capacity

24 x 2.0ml tubes

Features

Digital display for accurate and easy-to-read information
Compact and lightweight design at only 13.4 kg with a low noise level of less than 56 dB
Programmable timer from 30 seconds up to 9 hours and 59 minutes
Quick start-up time of 15 seconds for efficient operation
Robust performance with a kinetic energy of 4,070 Nm
Precision-engineered for reliable performance across diverse applications

The Eppendorf 5424 Centrifuge utilizes a digital display to provide both accurate and easy to read information at all times of operation. The 5424 centrifuge has a max speed of 15,000 rpm and a max relative centrifugal force of 21,130 x g. With a weight of only 13.4 kg, the Eppendorf 5424 offers a vast array of capabilities without a large footprint. With a low noise level of less than 56 decibels, the 5424 centrifuge is both compact and unobtrusive in just about any setting. The 5424 has a capacity up to 24 x 2ml micro test tubes.

All of our equipment is fully tested to perform at manufacturer specifications before being shipped.

Please confirm this rotor meets your application needs and request a different rotor, if necessary. Available rotors can be found in our Rotor Compatibility Guide.

INCLUDED:
The Eppendorf 5424 Centrifuge includes:

> FA-45-24-11 Rotor & Lid
> Power Cord
> NIST Centrifuge Calibration and Preventative Maintenance Report
> Operator's Manual
> Hex Rotor Wrench
> Full 180 Day Parts and Labor Warranty

Eppendorf 5424 Centrifuge w/ FA-45-24-11 Rotor Specifications

Maximum Speed	15,000 RPM
Maximum RCF	21,130 x g
Maximum Capacity	24 x 1.5/2.0ml
Timer	30 seconds to 9 hours, 59 minutes
Start Up Time	15s
Noise Level	<56 dB
Maximum Kinetic Energy	4,070 Nm
Dimensions (W x D x H)	9.3 x 12.6 x 8.94 in (23.6 x 32 x 22.7 cm)
Weight	29.5 lb. (13.4 kg)
Electrical Requirements	110-115V, 60Hz
Refrigeration	No Refrigeration

Preventative Maintenance Performed on The Eppendorf 5424 Centrifuge

Door Latch Assembly Checked for Full Function
Door Hinges are Checked and Lubed as Needed
Drive Belt is Checked for Rips and Tears and Replaced if Needed
Rotors and O-rings are Lubed as Needed
Lamps and Display are Checked and Replaced if Dim
Line Cord is Checked for Signs of Fray or Damage and Replaced Accordingly
Internal Circuitry is Checked for Faulty/Shorted Components and Replaced Accordingly

Downloads

Technical Specification Download

Operator's Manual Download

Request a Formal Quote

Centrifuge Inspection and Recertification Checklist

Confirm the power supply output voltages match specified requirements for stable distribution to all internal components
Measure and verify voltages at PCB test points to ensure accurate power delivery and circuit integrity
Confirm rotor compatibility with the centrifuge model and check that rotor detection systems recognize the rotor type
Inspect the exterior for any cosmetic or structural damage that could affect performance or safety
Check the door mechanism alignment to ensure secure and smooth opening and closing
Inspect and replace the gas strut with an OEM part to maintain proper door support and safety
Examine the rotor chamber bowl for dents or damage and replace as needed to ensure safe operation
Replace and confirm full functionality of all lid lock switches to maintain secure closure
Inspect and lubricate the door lock mechanism, applying grease to the lid lock rail for smooth operation
Test compressor functionality (if applicable) to ensure proper operation and consistent temperature control
Conduct an 8-12 hour cycle test to validate consistent performance over prolonged use
Confirm rotor motor stability, check for unusual noise, and assess mechanical integrity during operation
Inspect the condensation drain and clear any clogs to prevent moisture buildup in the rotor chamber
Verify RPM accuracy using an NIST-traceable tachometer and perform calibration as necessary
Check the centrifuge error log to ensure zero recorded issues, confirming system reliability

Technician Inspection and Recertification Checklist: Centrifuges

The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment

Task	Completed?	Remarks?
Confirm power supply output voltages match specified requirements	Completed
Measure and verify voltages at PCB test points for accuracy	Completed
Confirm rotor compatibility and detection for proper identification	Completed
Inspect exterior for cosmetic or structural damage	Completed
Check door mechanism alignment for secure opening and closing	Completed
Inspect and replace gas strut with OEM part as needed	Completed
Examine rotor chamber for dents or damage and replace if necessary	Completed
Replace and confirm functionality of all lid lock switches	Completed
Lubricate door lock mechanism and lid lock rail for smooth operation	Completed
Test compressor (if applicable) for proper operation and cooling	Completed
Run 8-12 hour cycle test to ensure consistent performance	Completed
Check rotor motor for stability, noise, and integrity	Completed
Inspect and clear condensation drain to prevent buildup	Completed
Verify RPM accuracy with NIST traceable tachometer and calibrate	Completed
Check centrifuge error log for zero recorded issues	Completed