 |
 |
 |
|
Popular Alternative Choice
Accuris E2502-400 PowerVolt Power Supply
- Accuris PowerVolt E2302-400 : Voltage 10-500 VDC, Current 4-400mA, Max Power 120W.
- Touch screen control, color TFT LCD, timer from 1 min to 20 hrs or continuous mode.
- Compact 3.5 x 5 x 8.5 in., weight 32.2 lb., operates at 0-40°C & 0-95% humidity.
- Includes: Power Cord, Guide, Documentation, 2-Year Warranty. 100-240VAC compatible.
Go to Product Details
Free Shipping and No Lead Time!
EC Apparatus EC-600-90 Electrophoresis Power Supply
The EC-600-90 Apparatus Electrophoresis Power Supply is controlled by three separate operating limits. An operating limit with a value above zero must be set for voltage, milliAmps, and watts in order to generate an output. The power supply is equipped with four sets of 4 mm output connectors, which are connected in parallel in order to run multiple chambers. The power supply operates in 3 modes: constant power, constant current or constant voltage. Constant power mode is especially crucial for certain laboratory techniques. All of our equipment is fully tested to perform at factory specifications before being shipped.
Included with the EC Apparatus 600-90 Electrophoresis Power Supply:
Includes: > Power Cord > Full 180 Day Parts and Labor Warranty
|
EC Apparatus 600-90 Power Supply
|
Max Voltage: 4000V
|
|
Max Current: 300mA
|
|
Max Wattage: 300W
|
- Verify internal power supply output for correct voltage in alignment with equipment specifications
- Inspect LED display for any dim or dead pixels, ensuring optimal readability
- Examine internal wiring and connections, checking for any rips, tears, or compromised insulation
- Ensure fan is clean and fully operational to maintain adequate cooling
- Test PCB test points for proper voltage output, confirming consistent circuit performance
- Validate functionality of all buttons and switches, ensuring responsive control
- Measure and confirm constant voltage, amplitude, and wattage using precise resistance values
- Cross-check displayed voltage with multimeter readings for accuracy
- Monitor for rapid resistance changes, software errors, and power fluctuations
- Inspect line cord for any signs of wear, cuts, or damage impacting safety
- Confirm cosmetic condition meets quality standards, free of any damage affecting functionality or aesthetics
Technician Inspection and Recertification Checklist: Electrophoresis Power Supplies
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Verify internal power supply output voltage
|
Completed
|
|
|
Inspect LED display for dim or dead pixels
|
Completed
|
|
|
Examine internal wiring for rips or tears
|
Completed
|
|
|
Ensure fan is clean and fully operational
|
Completed
|
|
|
Test PCB test points for voltage accuracy
|
Completed
|
|
|
Validate functionality of buttons and switches
|
Completed
|
|
|
Confirm constant voltage, amplitude, and wattage with resistance
|
Completed
|
|
|
Cross-check displayed voltage with multimeter
|
Completed
|
|
|
Monitor for rapid resistance changes and power fluctuations
|
Completed
|
|
|
Inspect line cord for wear or damage
|
Completed
|
|
|
Confirm cosmetic condition meets quality standards
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
