 |
 |
 |
|
Corning PC 310 Magnetic Stirrer
The Corning PC 310 Magnetic Stirrer is a compact and efficient tool designed to meet the mixing needs of any laboratory. This stirrer features a variable speed range from 60 to 1,110 RPM, allowing for precise control over the stirring process. The platform size of 6 x 7.5 inches (15.2 x 19.1 cm) provides ample space for various container sizes, making it versatile for different types of solutions and volumes. Its robust construction ensures durability and reliable performance, making it an essential device for daily laboratory use
All of our equipment will be fully tested to perform at factory specifications before being shipped.
The Corning PC 320 Hot Plate Stirrer includes:
- > Power Cord
- > Full 180 Day Parts and Labor Warranty
Corning PC 310 Magnetic Stirrer Specifications
|
Stirrer Speed
|
60 to 1,110 RPM
|
|
Platform Size
|
6 x 7.5 in. (15.2 x 19.1 cm)
|
|
Electrical Requirements
|
120V, 50/60Hz, 20W
|
- Inspect the display for clarity and brightness, replacing any dim or dead pixels to ensure optimal performance.
- Examine external regulators for structural integrity and damage, replacing if necessary (if applicable).
- Assess the functionality of temperature, CO₂, and H₂O sensors, verifying accuracy and consistency (if applicable).
- Check all internal wiring for frays, tears, or breakages, addressing any compromised sections.
- Confirm software settings are properly configured to match the specifications of internal components.
- Inspect and clean the fan for efficient airflow, replacing if wear or malfunction is detected.
- Verify the condition of wheels and leveling mounts, ensuring stability and ease of movement.
- Inspect door gaskets and latches for sealing integrity, replacing if compromised to maintain proper enclosure.
- Calibrate temperature accuracy to 37°C using an NIST-traceable temperature probe for precision.
- Calibrate CO₂ levels to 5% using a Fyrite combustion test kit to verify environmental control (if applicable).
- Confirm temperature and CO₂ stability over a 24-hour period to ensure consistent conditions.
- Conduct a cosmetic inspection, verifying the unit meets appearance and cleanliness standards.
Technician Inspection and Recertification Checklist
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment
| Task |
Completed? |
Remarks? |
| Inspect display for clarity and replace if needed | Completed | |
| Examine external regulators for integrity and damage | Completed | |
| Assess temperature, CO₂, and H₂O sensors for accuracy | Completed | |
| Check internal wiring for frays, tears, or breakages | Completed | |
| Confirm software settings match internal component specs | Completed | |
| Inspect and clean fan, replacing if wear is detected | Completed | |
| Verify condition of wheels and leveling mounts | Completed | |
| Inspect door gaskets and latches for sealing integrity | Completed | |
| Calibrate temperature to 37°C with NIST-traceable probe | Completed | |
| Calibrate CO₂ to 5% with Fyrite combustion test kit | Completed | |
| Confirm 24-hour temperature and CO₂ stability | Completed | |
| Conduct cosmetic inspection to ensure appearance standards | Completed | |
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
