 |
 |
 |
|
Cole-Parmer Stuart SHP-200-S Analog Hot Plate Stirrer
Stirrer Speed
100 to 2,000 RPM
Platform Size
6 x 6 in (15.2 x 15.2 cm)
- Microprocessor-controlled dual thermocouples for precise temperature regulation and overheating protection
- Powerful motor and strong magnets support stirring speeds from 100 to 2,000 RPM
- Mixes up to 15L of liquid for high-capacity applications
- Square 6 x 6-inch coated aluminum plate for durability and flexible vessel placement
- Flashing "hot" warning light remains active above 50C, even when unplugged
- Compact, stackable design minimizes benchtop space usage
- Aluminum casing enhances durability and longevity
- Control panel designed to prevent accidental spills
The Cole-Parmer Stuart SHP-200-S Analog Hot Plate Stirrer delivers precise heating and stirring control, making it an essential tool for laboratory applications. Featuring microprocessor-controlled dual thermocouples, it ensures accurate temperature regulation and overheating protection. The unit's powerful motor and strong magnets enable stirring speeds from 100 to 2,000 RPM and can mix up to 15L of liquid. A square 6 x 6-inch coated aluminum plate provides durability and flexibility for various vessel sizes, while the compact, stackable design optimizes benchtop space.
For enhanced safety, a flashing “hot” warning light remains active whenever the plate exceeds 50C, even when unplugged, preventing accidental burns. A colored LED indicator around the heat control knob displays real-time surface temperature, ensuring easy monitoring. The tough aluminum casing enhances durability, while a thoughtfully designed control panel prevents accidental spills. With a reliable and intuitive design, this hot plate stirrer is built for efficient and safe laboratory operation. All of our equipment will be fully tested to perform at factory specifications before being shipped.
The Cole-Parmer Stuart SHP-200-S Analog Hot Plate Stirrer includes:
- > Operator's Manual
- > Power Cord
- > Full 180 Day Parts and Labor Warranty
Cole-Parmer Stuart SHP-200-S Analog Hot Plate Stirrer Specifications
|
Maximum Temperature
|
325C
|
|
Stirrer Speed
|
100 to 2,000 RPM
|
|
Max. Stirring Volume
|
15L
|
|
Platform Size
|
6 x 6 in (15.2 x 15.2 cm)
|
|
Plate Material
|
Coated Aluminum
|
|
Weight
|
6.8 lb. (3.1 kg)
|
|
Dimensions (W x D x H)
|
7.1 x 10 x 4.8 in. (18 x 25.5 x 12.2 cm)
|
|
Electrical Requirements
|
120V, 60Hz, 800W
|
- Inspect the display for clarity and brightness, replacing any dim or dead pixels to ensure optimal performance.
- Examine external regulators for structural integrity and damage, replacing if necessary (if applicable).
- Assess the functionality of temperature, CO₂, and H₂O sensors, verifying accuracy and consistency (if applicable).
- Check all internal wiring for frays, tears, or breakages, addressing any compromised sections.
- Confirm software settings are properly configured to match the specifications of internal components.
- Inspect and clean the fan for efficient airflow, replacing if wear or malfunction is detected.
- Verify the condition of wheels and leveling mounts, ensuring stability and ease of movement.
- Inspect door gaskets and latches for sealing integrity, replacing if compromised to maintain proper enclosure.
- Calibrate temperature accuracy to 37°C using an NIST-traceable temperature probe for precision.
- Calibrate CO₂ levels to 5% using a Fyrite combustion test kit to verify environmental control (if applicable).
- Confirm temperature and CO₂ stability over a 24-hour period to ensure consistent conditions.
- Conduct a cosmetic inspection, verifying the unit meets appearance and cleanliness standards.
Technician Inspection and Recertification Checklist
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment
| Task |
Completed? |
Remarks? |
| Inspect display for clarity and replace if needed | Completed | |
| Examine external regulators for integrity and damage | Completed | |
| Assess temperature, CO₂, and H₂O sensors for accuracy | Completed | |
| Check internal wiring for frays, tears, or breakages | Completed | |
| Confirm software settings match internal component specs | Completed | |
| Inspect and clean fan, replacing if wear is detected | Completed | |
| Verify condition of wheels and leveling mounts | Completed | |
| Inspect door gaskets and latches for sealing integrity | Completed | |
| Calibrate temperature to 37°C with NIST-traceable probe | Completed | |
| Calibrate CO₂ to 5% with Fyrite combustion test kit | Completed | |
| Confirm 24-hour temperature and CO₂ stability | Completed | |
| Conduct cosmetic inspection to ensure appearance standards | Completed | |
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
