 |
 |
 |
|
Buchi R-124 Rotary Vap System
The Buchi R-124 Rotary Vap System includes poly-coated out trap and inner trap "CR" glassware, evaporating and receiving flasks and the Buchi B-481 Heating Bath. The digital heating bath can be adjusted from +20° to 100°C. Its modular construction makes it possible to configure units with different glassware assemblies. The R-124 offers a speed range of 20 to 240 rotations per minute with a power consumption of 37 watts. The R-124 features a LCD digital display with variable analog controllers and an adjustable hydraulic height control for ultimate precision.
This rotary evaporator has been fully tested and is prepped for immediate shipment.
The Buchi R-124 Rotary Vap System includes:
- > "C" Glassware
- > V-500 Vacuum Pump
- > Dry Ice Trap
- > Evaporating and Receiving Flasks
- > Tubing and Connectors
- > B-481 Heating Bath
- > Power Cord
- > Full 180 Day Parts and Labor Warranty
Buchi R-124 Rotary Vap System Specifications
|
Speed Range
|
20 – 240 RPM
|
|
Display
|
Digital LCD
|
|
Adjustable Height
|
Yes, Manual hydraulic
|
|
Power consumption
|
37 watts
|
|
B-481 Heating Bath
|
|
Temperature Range
|
20° to 100°C
|
|
Temperature Accuracy
|
±2°C
|
|
Capacity
|
5L
|
 Click Here to View all the Technical Specs for the R-124
- Inspect all glassware for chips or cracks, reapplying vacuum grease to stopcocks to ensure a secure seal
- Examine displays, replacing any dim or dead pixels to maintain clear visibility
- Verify drive motor RPM using a tachometer for accurate rotational speed
- Confirm the ease of raising and lowering the tower, lubricating as needed for smooth operation
- Check the Woulff bottle for any leaks or structural breakages, ensuring airtight performance
- Disassemble and inspect the vacuum pump, cleaning and replacing seals or components as necessary
- Inspect internal wiring for each component, checking for any frays, cuts, or potential breakages
- Examine all hoses, hose barbs, and seals for signs of wear or leaks, ensuring integrity
- Inspect the vapor duct seal and replace if compromised to maintain vacuum efficiency
- Verify and calibrate the vacuum controller for accurate pressure regulation
- Confirm all hoses and cables are securely fastened to prevent disconnections or leaks
- Check heat bath temperatures against settings to ensure precise thermal control
- Confirm the final system vacuum level meets manufacturer specifications
- Ensure cosmetic condition meets standards, with no damage impacting function or appearance
Technician Inspection and Recertification Checklist: Rotary Evaporators
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Inspect all glassware for chips or cracks, apply vacuum grease to stopcocks
|
Completed
|
|
|
Examine displays and replace dim/dead pixels
|
Completed
|
|
|
Verify drive motor RPM with tachometer
|
Completed
|
|
|
Confirm ease of raising/lowering tower, lubricate if needed
|
Completed
|
|
|
Check Woulff bottle for leaks or structural issues
|
Completed
|
|
|
Disassemble and inspect vacuum pump, clean/replace parts as needed
|
Completed
|
|
|
Inspect internal wiring for frays, cuts, or breakages
|
Completed
|
|
|
Examine hoses, hose barbs, and seals for leaks
|
Completed
|
|
|
Inspect vapor duct seal, replace if compromised
|
Completed
|
|
|
Verify and calibrate vacuum controller
|
Completed
|
|
|
Confirm hoses and cables are securely fastened
|
Completed
|
|
|
Check heat bath temperatures for accurate control
|
Completed
|
|
|
Confirm final system vacuum level meets specifications
|
Completed
|
|
|
Ensure cosmetic condition meets standards
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
