 |
 |
 |
|
Branson M2800H Heated Ultrasonic Cleaner
The Branson M2800H Heated Ultrasonic Cleaner stands out as a premier choice in the Branson M and MH Series, offering unmatched precision and reliability. This cleaner features a 2.8-liter (0.75 gallons) capacity and operates with a 40 kHz frequency, which is ideal for robust and consistent cleaning. The unit includes a 60-minute mechanical timer and offers continuous operation with a heating capability that reaches up to 69°C (156.2°F). Its tank dimensions are 9.5 x 5.5 x 4 inches, with the overall dimensions being slightly larger at 13.3 x 12 x 11.9 inches, designed to fit conveniently within any workspace. Notably, the MH Series boasts several advanced features that enhance its utility. The sweep frequency technology effectively eliminates standing waves, ensuring consistent cavitation and thorough cleaning throughout the tank. It also includes rugged industrial transducers and controls that are strategically placed in an easily accessible control tower panel above the tank, safeguarding them from potential damage by cleaning solutions. The cleaner’s design includes built-in pour drains, facilitating easy maintenance and handling. Additionally, its plastic body is chemical-resistant, enhancing durability. A standout feature is the constant activity/power tracking that automatically adjusts to changes in liquid level and temperature, maintaining consistent ultrasonic power and ensuring uniform cleaning results across varied load conditions. This feature makes the M2800H particularly effective for environments with multiple users or changing bath conditions, securing its position as a highly efficient and reliable ultrasonic cleaning solution.
All of our equipment will be fully tested to perform at factory specifications before being shipped.
The Branson M2800H Heated Ultrasonic Cleaner includes:
- > Tank Cover
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Branson M2800H Heated Ultrasonic Cleaner Specifications
|
Capacity
|
2.8L (0.75 gallons)
|
|
Timer
|
0 to 60 minutes
|
|
Frequency
|
40 kHz
|
|
Temperature Range
|
69°C (156.2°F)
|
|
Tank Dimensions (L x W x D)
|
9.5 x 5.5 x 4 in. (23 x 14 x 10 cm)
|
|
Overall Dimensions (L x W x D)
|
13.3 x 12 x 11.9 in. (33.7 x 30.4 x 30.2 cm)
|
|
Weight
|
9 lb. (4.1 kg)
|
|
Electrical Requirements
|
120V, 50/60Hz, 235W, 2A
|
- Verify that the power supply and PCB are delivering stable and correct voltage outputs to all essential circuits
- Inspect the display for any dim, dead, or flickering pixels, replacing affected areas to maintain clear and accurate readings
- Confirm that all buttons and knobs function fully, providing precise and reliable input control
- Verify that the timer, degassing function, sonics, and heating elements are working properly, ensuring full operational capability
- Check the lid for signs of damage, warping, or wear, replacing as needed to maintain a secure seal
- Inspect the tank for any holes, rust, or other damage, confirming it remains structurally sound
- Confirm there are no fluid leaks within the tank to ensure operational safety
- Inspect for any internal leaks that may compromise performance or safety
- Examine internal wiring for tears, breaks, or worn areas; replace any components that do not meet performance standards
- Inspect internal insulation for wear or degradation, replacing where necessary to maintain thermal efficiency and safety
- Load a prepared sample into the ultrasonic cleaner, testing to confirm proper ultrasonic function and cleaning efficacy
- Verify temperatures using a NIST-traceable temperature probe to ensure accuracy
- Conduct a thorough cosmetic inspection to confirm all surfaces and components meet quality and aesthetic standards
Technician Inspection and Recertification Checklist: Ultrasonic Cleaner
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment
|
Task
|
Completed?
|
Remarks?
|
|
Verify stable, correct voltage outputs from power supply and PCB to circuits
|
Completed
|
|
|
Inspect display for dim, dead, or flickering pixels; replace as needed
|
Completed
|
|
|
Confirm full functionality of all buttons and knobs for reliable input control
|
Completed
|
|
|
Verify proper function of timer, degassing, sonics, and heating elements
|
Completed
|
|
|
Check lid for damage, warping, or wear; replace if needed for secure seal
|
Completed
|
|
|
Inspect tank for holes, rust, or damage to confirm structural integrity
|
Completed
|
|
|
Confirm absence of fluid leaks within tank for operational safety
|
Completed
|
|
|
Inspect for internal leaks that may compromise performance or safety
|
Completed
|
|
|
Examine internal wiring for tears or breaks; replace components as needed
|
Completed
|
|
|
Inspect internal insulation for wear; replace to maintain thermal efficiency
|
Completed
|
|
|
Test ultrasonic function by cleaning a prepared sample to confirm efficacy
|
Completed
|
|
|
Verify temperature accuracy using a NIST-traceable temperature probe
|
Completed
|
|
|
Conduct cosmetic inspection to confirm quality of surfaces and components
|
Completed
|
|
To View More of Our Recertification Protocol Click Here
|
|
|
 |
|
 |
|
