 |
 |
 |
|
Biorad Gel Doc XR+ Imaging System
Applications
Fluorescence, Colormetric/Densitometry, Gel Documentation
Pixel Size (H x V)
4.65 x 4.65 µm
Filter Holder
3 Positions (2 Filters, 1 Without Filter)
- Gel and blot imaging and analysis are quick and accurate
- Automated, hands-off routines; no training is required
- Save and recall all the steps in the workflow for repeatable and reproducible results
- Optimize the system at setup for image data that is always accurate, reproducible, and free of imaging artifacts
- Wide range of applications with special accessories to preserve sample integrity for downstream research while ensuring user safety
- Comprehensive, automated quantitative analysis of protein and DNA samples in seconds
- Customize and organize data in reports
- Obtain publication-quality results quickly
- Images are in focus at all times, regardless of zoom level or sample position
- Appropriate flat fielding correction is automatically and consistently applied to image data for every application
- Imaging artifacts are automatically corrected
The Biorad Gel Doc XR+ Imaging System is an easy-to-use,
high-performance system that captures images in real time, allowing you to more
accurately position and focus on your sample. The Gel Doc XR+ system combines
a compact darkroom, UV-transilluminator workstation, CCD camera, motorized zoom
lens, and user-friendly Image Lab software to document and quantitate gels
stained with ethidium bromide and other fluorophores. The iris, zoom, and focus
of the lens can be manipulated either onscreen within the Image Lab software or
by the instrument control panel. With Biorad's intuitive software, images
acquired with the Gel Doc XR+ can be rapidly optimized, annotated, analyzed,
and printed.
The Biorad Gel Doc XR+ Imaging System is fully tested to perform at factory
specifications before being shipped.
The Biorad Gel Doc XR+ Imaging System includes:
- > Windows 11 Professional 64-Bit Data Station with Image Lab (6.1) Preinstalled & Flatscreen Monitor
- > UV Camera
- > Flat Screen Monitor
- > Communication Card & Interface Cables
- > UV Filter
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Biorad Gel Doc XR+ Imaging System Specifications
|
Applications
|
|
|
Chemiluminescence
|
No
|
|
Fluorescence
|
Yes
Note: Use the optional XcitaBlue kit if performing SYBR® Safe DNA
applications, because the UV to blue conversion screen allows you to
visualize DNA samples while protecting against UV damage.
|
|
Colorimetry/densitometry
|
Yes
|
|
Gel documentation
|
Yes
|
|
Hardware Specifications
|
|
|
Maximum sample size
|
28 x 36 cm
|
|
Maximum image area
|
19.4 x 26 cm
|
|
Excitation source
|
Epi-white light and trans-UV (302 nm) are standard (optional 365 nm
lamp available); optional trans-white conversion screen and XcitaBlue™
UV/blue conversion screen available
|
|
Illumination control
|
3 modes (trans-UV, trans white, epi-white)
|
|
Detector
|
CCD
|
|
Pixel size (H x V)
|
4.65 x 4.65 µm
|
|
Filter holder
|
3 positions (2 for filters, 1 without filter)
|
|
Emission filters
|
1 included (standard), 3 optional
|
|
Dynamic range
|
>3.0 orders of magnitude
|
|
Pixel density (gray levels)
|
4,096
|
|
Dynamic flat fielding
|
Application specific, for all applications
|
|
Instrument size (L x W x H)
|
36 x 60 x 96 cm
|
|
Instrument weight
|
32 kg
|
|
Operating Ranges
|
|
|
Operating voltage
|
110/115/230 V AC nominal
|
|
Operating temperature
|
10–28°C (21°C recommended)
|
|
Operating humidity
|
<70% noncondensing
|
Biorad Gel Doc XR+ Imaging System Applications:
|
Chemiluminescence
|
No
|
|
Fluorescence
|
Yes
|
|
Chemifluorescence
|
No
|
|
Colormetric/Densitometry
|
Yes
|
|
Gel Documentation
|
Yes
|
|
Isotopic Imaging
|
No
|
|
Computer Specifications
|
|
Processor
|
Intel Core I5-8500 CPU
|
|
RAM
|
32.0 GB
|
|
Hard Drive
|
500GB Internal SSD
|
|
Operating System
|
Windows 11 Professional, 64-bit
|
|
|
|
 |
|
 |
|
