Biorad ChemiDoc Touch Imaging System
Applications
Chemiluminescence, Fluorescence, Colorimetry/Densitometry, Gel Documentation
Dynamic Range
> 4.0 orders of magnitude
- Compact design with a deeply cooled 6MP CCD detector for high-quality imaging
- Multitouch 12.1-inch display with intuitive interface for easy operation
- Dynamic autoexposure modes tailored for fluorescent and visible applications
- Integrated UV transilluminator and white LED epi illumination for versatile imaging
- Automated filter wheel and emission filters for optimized detection
- Precalibrated autofocus and flat fielding ensure consistent image quality
- Onboard computer system with 4 GB RAM and 60 GB storage capacity
- Thermoelectric cooling system with a setpoint of -25°C to minimize noise
- Compatible with Biorad Image Lab Touch software for capture and analysis
- Supports sample imaging up to 16.8 x 21 cm with maximum thickness of 5 mm
The Biorad ChemiDoc Touch Imaging System is an advanced and versatile imaging solution designed for laboratory applications requiring high-quality and high-sensitivity gel and western blot images. This compact, chemiluminescent-capable instrument streamlines the imaging process with its automated selection of detection parameters and intuitive touch screen interface. Equipped with a highly sensitive CCD camera and a large maximum-aperture lens, the ChemiDoc Touch excels in capturing images across a wide dynamic range of more than four orders of magnitude. It supports a broad spectrum of laboratory gels and blots, thanks to its built-in UV transilluminator, white LEDs for epi illumination, and compatibility with various dyes and fluorophores.
The system is capable of chemiluminescence, fluorescence, colorimetry/densitometry, and gel documentation applications. Its smart, tray-based imaging automatically identifies correct applications, adjusting filter and illumination sources accordingly. Other features include autofocus with pre-calibrated focus for any zoom setting, dynamic image flat fielding, and autoexposure modes tailored for different applications. The onboard computer boasts a 12.1-inch multitouch display, 4 GB RAM, and 60 GB disk space. The deep-cooled CCD detector ensures optimal image quality with minimal noise. The ChemiDoc Touch requires Biorad's Image Lab Touch software for image capture, while analysis necessitates Image Lab software version 5.2 or greater on a separate Windows-based computer included with this system.
All of our equipment is fully tested to perform at factory
specifications before being shipped.
The Biorad ChemiDoc Touch Imaging System includes:
- > Windows 11 Dell Workstation with Image Lab (6.1) Preinstalled & Flat Screen Monitor
- > Thermoelectric Cooled 6 MP UV Camera
- > Chemi/UV/Stain-Free Sample Tray
- > Standard UV Filter & Chemiluminescence Filter
- > Communication Card & Interface Cables
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Biorad ChemiDoc Touch Imaging System Specifications
|
Applications
|
|
Chemiluminescence
|
Yes
|
|
Fluorescence
|
Yes
|
|
Colorimetry/Densitometry
|
Yes
|
|
Gel Documentation
|
Yes
|
|
Automation Capabilities
|
|
Workflow Automated Selection
|
Application drive, tray-based imaging
|
|
Autofocus
|
Precalibrated focus for any zoom setting
|
|
Image Flat Fielding
|
Dynamic; precalibrated and optimized per application
|
|
Autoexposure
|
2 user-defined modes (rapid or optimal) for chemiluminescent applications
2 user-defined modes (intense or faint bands) for fluorescent and visible applications
|
|
Hardware Specifications
|
|
Touch Screen Functionality
|
Multitouch capable
12.1 in. (30.73 cm) display
Display resolution of 1024 x 768 pixels
|
|
Onboard Computer System
|
4 GB RAM
60 GB disk space
4 USB ports
|
|
Maximum Sample Thickness
|
5 mm
|
|
Maximum Image Area (L x W)
|
16.8 x 21 cm
|
|
Excitation Source
|
Trans-UV 302 nm (standard)
Epi-white (standard)
Trans-white (requires white sample tray, not included)
Trans-blue (requires blue sample tray, not included)
|
|
Detector
|
Deeply Cooled CCD, 6MP
|
|
Pixel Size
|
4.54 x 4.54 µm
|
|
Cooling System
|
Thermoelectric, setpoint -25°C
|
|
Filter Wheel
|
Automated
|
|
Emission Filters
|
535 - 645 nm standard filter
|
|
Dynamic Range
|
> 4.0 orders of magnitude
|
|
Pixel Density (Gray Levels)
|
65,535
|
|
Instrument Size (D x W x H)
|
25 x 20 x 21 in. (62.6 x 50 x 54.3 cm)
|
|
Instrument Weight
|
78 lb. (32 kg)
|
|
Operating Ranges
|
|
Operating Voltage
|
100 to 240 VAC, 50/60Hz
|
|
Operating Temperature
|
10°C to 28°C
|
|
Operating Humidity
|
10 to 80% relative humidity (noncondensing)
|
Biorad ChemiDoc Touch Imaging System Applications
|
Chemiluminescence
|
Yes
|
|
Fluorescence
|
Yes
|
|
Chemifluorescence
|
No
|
|
Colormetric/Densitometry
|
Yes
|
|
Gel Documentation
|
Yes
|
|
Isotopic Imaging
|
No
|
