Beckman Coulter Allegra X-14 Centrifuge

The Beckman Coulter Allegra X-14 Centrifuge is a benchtop refrigerated centrifuge that generates centrifugal forces required for a wide variety of applications. The Allegra X-14 is microprocessor-controlled, providing interactive operation. The instrument design features a brushless asynchronous motor, automatic rotor identification system, program memory that enables repeated run conditions, and a choice of acceleration and deceleration rates. User messages alert the operator to conditions that may need attention. The Beckman Coulter Allegra X-14 Centrifuge also features an easy to use control panel, which is mounted at an angle on the front of the centrifuge for easy visibility and access. A rotor identification system prevents the installed rotor from running above its maximum rated speed. During acceleration the microprocessor checks the magnetic rotor identification. Speed is limited to the maximum safe speed of the identified rotor. If the system identifies a rotor different than the one entered by the user, the system displays an error message and reduces the speed to the maximum allowable speed of the rotor. An imbalance detector monitors the rotor during the run, causing automatic shutdown if rotor loads are severely out of balance. The included rotor reaches a maximum speed of 4,300 RPM.

All of our equipment is in excellent condition and will be fully tested to perform at factory specifications before being shipped.

Please confirm this rotor meets your application needs and request a different rotor, if necessary. Available rotors can be found in our Rotor Compatibility Guide.

Beckman Coulter Allegra X-14 Centrifuge Specifications

Maximum Speed	10,200 RPM (4,300 RPM with included rotor)
Maximum RCF	11,400 x g (4,303 x g with included rotor)
Maximum Capacity	4 x 750ml
Temperature Range	N/A
Timer	Up to 9 hours 59 minutes, or continuous run (hold)
Acceleration Rates	10
Deceleration Rates	11
Noise Level	< 64 dBa
Maximum Heat Dissipation	4318 Btu/hr (1.3 kW)
Dimensions (W x D x H)	30 x 26.5 x 16.5 in. (76.2 x 67.3 x 41.9 cm)
Weight	283 lb. (128 kg)
Electrical Requirements	120V, 60Hz, 12A
Refrigeration	No Refrigeration

Preventative Maintenance Performed on The Beckman Coulter Allegra X-14 Centrifuge

• Door Latch Assembly Checked for Full Function
• Door Hinges are Checked and Lubed as Needed
• Drive Belt is Checked for Rips and Tears and Replaced if Needed
• Rotors and O-rings are Lubed as Needed
• Lamps and Display are Checked and Replaced if Dim
• Line Cord is Checked for Signs of Fray or Damage and Replaced Accordingly
• Internal Circuitry is Checked for Faulty/Shorted Components and Replaced Accordingly